From the outset, we knew this: If you want to make the fastest blade in the world, you have to rely on a whole set of interlinked techno- logies. And not just one single improvement.
So we launched an investigation.
Our technicians examined the teeth of typical hacksaw blades, which are usually milled. And found that milled teeth simply aren’t sharp enough.
Instead, the teeth should be
We went on to examine tooth geometry.
Tests proved that teeth with a positive rake angle are more aggressive. They bite better. So we decided to use a steel alloy that makes tooth edges more resistant.
They’ll last longer.
The crowning result is the New Sandflex hacksaw blade. A
But why take our word for it?
Give the New Sandflex a try. Discover why it’ll consolidate our position as the No. 1 global brand.