Bahco Saw manual Tooth forming, Setting, Heat treatment

Page 3

Key Production Processes

Tooth forming

High technology milling and grinding processes are used for precision tooth forming enabling sharper and stronger teeth to be produced.

Setting

Computer controlled measuring devices and camera monitoring systems check every tooth. This information is collated and displayed on a visual monitor which,

•Measures against set tolerance

•Has automatic shut off

•Gives high consistency of set

•Provides a report card on every coil

•Permanently backs up the Quality record on our computer database.

Heat treatment

The latest technology heat treatment processes ensure:

•High consistency

•Easier welding alignment

•Reduced handling

All completed product is delivered into our highly automated distribution centres.

Introduction/Key Production Processes

1

Image 3

Contents Global Precision Introduction Setting Tooth formingHeat treatment Service Storage and DistributionWeld Centres Development Services/ResearchCustomer Support Service Research and DevelopmentBandsaw Selection Guide Metal CuttingNon-Ferrous Cutting Bandsaw Selection Guide Raker set General InformationBand Length Types of Set Band WidthTeeth Per Inch TPI Bandsawing factsGeneral Information Feed Rate/Chips Tooth pitch for solid workpieces Cutting pipes and profiles Tooth Shape guide Tooth Shape GuideNon-ferrous Cutting Evenly pitched Production Cutting Sandflex CobraFor high productivity cutting of large workpieces Sandflex Cobra PSG Production CuttingFor high productivity cutting of difficult-to-cut materials Sandflex King Cobra PHGProduction Cutting Carbide Triple Set Xtra Other Production/Special Purpose Cutting Other Production/Special Purpose Cutting Sandflex Die-BandFor contour sawing of tool and mould steels For bundle cutting of tubes and structural steel Sandflex FabricatorFor easy-to-cut steels Multi-purposeMulti-purpose Cutting Sandflex Dragon14/18 Sandflex Portable Bandsaw BladesFor portable hand held machines 10/14For light machines with limited feed force Sandflex CompensatorSandflex Multi-cut For horizontal machines Non-ferrous CuttingFor vertical machines and contour cutting Economical Bi-Metal blade for non-ferrous cutting Carbide Triple Set Carbide Grit Carbide GritMulti-Grit BandCalc Sawing AidsTachometer Sawing AidsTensionmeter RefractometerImportant Facts Troubleshooting GuideTroubleshooting Guide 3000 3001 3661 4121 5335 910 137 175 Packaging InformationLoop packaging/Bimetal and Carbide 3866, 3868 Coil packagingOrder Form/Enquiry Form Order Form/Enquiry FormBahco Tools