Black & Decker CHS6000-JP01 manual Vibration, Batteries, Chargers, Symbols on the charger

Page 6

Vibration

The declared vibration emission values stated in the technical data and the declaration of conformity have been measured in accordance with a standard test method provided by EN 60745 and may be used for comparing one tool with another. The declared vibration emission value may also be used in a preliminary assessment of exposure.

Warning! The vibration emission value during actual use of the power tool can differ from the declared value depending on the ways in which the tool is used. The vibration level may increase above the level stated.

When assessing vibration exposure to determine safety measures required by 2002/44/EC to protect persons regularly using power tools in employment, an estimation of vibration exposure should consider, the actual conditions of use and the way the tool is used, including taking account of all parts of the operating cycle such as the times when the tool is switched off and when it is running idle in addition to the trigger time.

Additional safety instructions for batteries and chargers

Batteries

Never attempt to open for any reason.

Do not expose the battery to water.

Do not expose the battery to heat.

Do not store in locations where the temperature may exceed 40°C.

Charge only at ambient temperatures between 10°C and 40°C.

Charge only using the charger provided with the appliance/tool. Using the wrong charger could result in an electric shock or overheating of the battery.

When disposing of batteries, follow the instructions given in the section "Protecting the environment".

Do not damage/deform the battery pack either by puncture or impact, as this may create a risk of injury and fire.

Do not charge damaged batteries.

Under extreme conditions, battery leakage may occur. When you notice liquid on the batteries, carefully wipe the liquid off using a cloth. Avoid skin contact.

In case of skin or eye contact, follow the instructions

below.

Warning! The battery fluid may cause personal injury or damage to property. In case of skin contact, immediately rinse with water. If redness, pain or irritation occurs seek medical attention. In case of eye contact, rinse immediately with clean water and seek medical attention.

Chargers

The charging base is intended for indoor use only.

Your charger has been designed for a specific voltage. Always check that the mains voltage corresponds to the voltage on the rating plate.

Warning! Never attempt to replace the charger unit with a regular mains plug.

Use your Black & Decker charger only to charge the battery in the appliance/tool with which it was supplied. Other batteries could burst, causing personal injury and damage.

Never attempt to charge non-rechargeable batteries.

If the supply cord is damaged, it must be replaced by the manufacturer or an authorised Black & Decker Service Centre in order to avoid a hazard.

Do not expose the charger to water.

Do not open the charger.

Do not probe the charger.

The appliance/tool/battery must be placed in a well ventilated area when charging.

Electrical safety

Your charger has been designed for a specific voltage. Always check that the mains voltage corresponds to the voltage on the rating plate.

Warning! Never attempt to replace the charger unit with a regular mains plug.

Symbols on the charger

 

 

 

Your charger is double insulated; therefore no earth

 

 

 

 

 

 

 

 

 

wire is required.

 

 

 

Short circuit proof safety isolating transformer. The

 

 

 

mains supply is electrically separated from the

 

 

 

transformer output.

130oC

The charger automatically shuts off if the ambient

 

 

 

 

temperature becomes too high. As a consequence

 

 

 

 

 

 

 

 

 

the charger will be inoperable. The charging base

 

 

 

must be disconnected from the mains supply and

 

 

 

taken to an authorised service centre for repair.

The charging base is intended for indoor use only.

If the supply cord is damaged, it must be replaced by the manufacturer or an authorised Black & Decker Service Centre in order to avoid a hazard.

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Page English Original instructions Page Safety instructions Intended useSafety of others Batteries Symbols on the chargerVibration ChargersFeatures AssemblyUse Maintenance Protecting the environmentSawing Metal EC declaration of conformity GuaranteeTechnical data CHS6000 H1 CHS6000 H1Page CHS600 CHS6000 Do not forget to register your product

CHS6000-JP01, CHS600 specifications

The Black & Decker CHS600 and CHS6000-JP01 are innovative trimming tools designed to meet the needs of both professionals and DIY enthusiasts. These cordless hedge trimmers combine power, precision, and convenience to provide an unparalleled cutting experience.

One of the standout features of these models is their lightweight design, which enhances maneuverability and reduces user fatigue during extended periods of use. With a weight that allows for easy handling, even in hard-to-reach areas, users can comfortably maintain their hedges, shrubs, and other greenery.

Powered by a high-performance lithium-ion battery, the CHS600 and CHS6000-JP01 deliver consistent power throughout their runtime, enabling users to tackle dense foliage without worrying about power loss. The battery technology also ensures faster charging times and a longer lifespan, making it a reliable choice for frequent use.

Another significant characteristic of these hedge trimmers is their dual-action blade design. This feature provides a smoother cutting experience and minimizes vibrations, which leads to a cleaner cut with reduced chances of damaging the plants. The precision-ground blades are also engineered to stay sharper for longer, requiring less frequent maintenance and sharpening.

Safety and user-friendliness are paramount in the design of the CHS600 and CHS6000-JP01. They are equipped with safety switches to prevent accidental starts, while the ergonomic handle ensures a secure grip, which is essential when working on uneven surfaces or in challenging conditions. The rotating handle allows for flexibility and ease of use when trimming at different angles.

Moreover, both models boast a well-balanced weight distribution, further enhancing control and reducing strain on the user's hands and arms. They also come with a protective blade guard for safe storage and transport, ensuring that users can keep their tools in optimal condition when not in use.

In summary, the Black & Decker CHS600 and CHS6000-JP01 are powerful, efficient hedge trimmers that combine cutting-edge technology with user-friendly features. Whether trimming hedges, maintaining garden aesthetics, or shaping plants, these tools are designed to deliver exceptional performance and convenience. With their advanced battery technology, sharp blades, and ergonomic design, they are an excellent choice for anyone looking to maintain their outdoor space efficiently.
Top Page Image Contents