Features, Assembly, Use | Black & Decker CHS6000-JP01 specification

Labels on tools

Warning! To reduce the risk of injury, the user must read the instruction manual.

Features

1.Shoe

2.Lock-off button

3.Charging socket

4.On/Off switch

5.Blade clamp release lever

6.Charger plug

7.Charger

Assembly

Fitting and removing a saw blade (fig. A)

The tool accepts both T-shank and universal shank jig saw blades.

Fitting:

Push down on the blade clamp release lever (5) to its fully open position.

Insert the blade shank (8) from the front.

Release the blade clamp release lever (5).

Removing:

Push down on the blade clamp release lever (5) to its fully open position.

Remove the blade.

Release the blade clamp release lever (5).

Residual risks

Additional residual risks may arise when using the tool which may not be included in the enclosed safety warnings. These risks can arise from misuse, prolonged use etc.

Even with the application of the relevant safety regulations and the implementation of safety devices, certain residual risks cannot be avoided. These include:

Injuries caused by touching any rotating/moving parts.

Injuries caused when changing any parts, blades or accessories.

Injuries caused by prolonged use of a tool. When using any tool for prolonged periods make sure you take regular breaks.

Impairment of hearing.

Health hazards caused by breathing dust developed when using your tool (example:- working with wood, especially oak, beech and MDF).

Use

Warning! Let the tool work at its own pace. Do not overload.

Charging the battery (fig. B)

The battery needs to be charged before first use and whenever it fails to produce sufficient power on jobs that were easily done before. When charging the battery for the first time, or after prolonged storage, it will only accept an 80% charge. After several charge and discharge cycles, the battery will attain full capacity. The battery may become warm while charging; this is normal and does not indicate a problem.

Warning! Do not charge the battery at ambient temperatures below 10°C or above 40°C. Recommended charging temperature is approximately 24°C.

To charge the battery, insert the charger plug (6) into the connector (3).

Plug in the charger (7) and switch on at the mains.

Leave the tool connected to the charger for 6-8 hours.

The charger may hum and become warm while charging; this is normal and does not indicate a problem.

Generally, a charging time of 6 hours will enable the tool to operate at an effective power level for most tasks. However, further charging for up to 8 hours could significantly increase the run time, depending on the battery and the charging conditions.

Before using the tool, unplug the charger (7) and disconnect the tool from the charger.

Do not use the tool while it is connected to the charger.

Switching on and off (fig. C)

To switch the tool on, push the lock-off button (2) to the unlock position and squeeze the on/off switch (4).

To switch the tool off, release the on/off switch (2).

Sawing (fig. D)

Hold the tool firmly with both hands while cutting.

The shoe (1) should be held firmly against the material being cut. This will help prevent the saw from jumping, reduce vibration and minimise blade breakage.

Let the blade run freely for a few seconds before starting the cut.

Apply only a gentle pressure to the tool while performing the cut.

Hints for Optimum Use

Sawing laminates

Because the saw blade cuts on the upward stroke, splintering may occur on the surface closest to the shoe plate.

Use a fine-tooth saw blade.

Saw from the back surface of the workpiece.

CHS6000-JP01, CHS600 specifications

The Black & Decker CHS600 and CHS6000-JP01 are innovative trimming tools designed to meet the needs of both professionals and DIY enthusiasts. These cordless hedge trimmers combine power, precision, and convenience to provide an unparalleled cutting experience.

One of the standout features of these models is their lightweight design, which enhances maneuverability and reduces user fatigue during extended periods of use. With a weight that allows for easy handling, even in hard-to-reach areas, users can comfortably maintain their hedges, shrubs, and other greenery.

Powered by a high-performance lithium-ion battery, the CHS600 and CHS6000-JP01 deliver consistent power throughout their runtime, enabling users to tackle dense foliage without worrying about power loss. The battery technology also ensures faster charging times and a longer lifespan, making it a reliable choice for frequent use.

Another significant characteristic of these hedge trimmers is their dual-action blade design. This feature provides a smoother cutting experience and minimizes vibrations, which leads to a cleaner cut with reduced chances of damaging the plants. The precision-ground blades are also engineered to stay sharper for longer, requiring less frequent maintenance and sharpening.

Safety and user-friendliness are paramount in the design of the CHS600 and CHS6000-JP01. They are equipped with safety switches to prevent accidental starts, while the ergonomic handle ensures a secure grip, which is essential when working on uneven surfaces or in challenging conditions. The rotating handle allows for flexibility and ease of use when trimming at different angles.

Moreover, both models boast a well-balanced weight distribution, further enhancing control and reducing strain on the user's hands and arms. They also come with a protective blade guard for safe storage and transport, ensuring that users can keep their tools in optimal condition when not in use.

In summary, the Black & Decker CHS600 and CHS6000-JP01 are powerful, efficient hedge trimmers that combine cutting-edge technology with user-friendly features. Whether trimming hedges, maintaining garden aesthetics, or shaping plants, these tools are designed to deliver exceptional performance and convenience. With their advanced battery technology, sharp blades, and ergonomic design, they are an excellent choice for anyone looking to maintain their outdoor space efficiently.