When cutting thin sheet metal, clamp a piece of scrap wood to the back surface of the workpiece and cut through this sandwich.
When cutting metal piping, do not cut directly through the pipe as you would saw a wooden dowel. Instead, cut around the circumference of the pipe to avoid pinching the blade. Only one section of the blade should be in contact with the pipe.
Spread a film of oil along the intended line of cut.
Maintenance
Your Black & Decker tool has been designed to operate over a long period of time with a minimum of maintenance. Continuous satisfactory operation depends upon proper tool care and regular cleaning.
Your charger does not require any maintenance apart from regular cleaning.
Warning! Before performing any maintenance on the tool, unplug the charger before cleaning it.
Regularly clean the ventilation slots in your tool and charger using a soft brush or dry cloth.
Regularly clean the motor housing using a damp cloth. Do not use any abrasive or
Protecting the environment
Should you find one day that your appliance needs replacement, or if it is of no further use to you, think of the protection of the environment. Black & Decker repair agents will accept old Black & Decker tools and ensure that they are disposed of in an environmentally safe way.
Separate collection of used products and packaging allows materials to be recycled and used again.
Local regulations may provide for separate collection of electrical products from the household, at municipal waste sites or by the retailer when you purchase a new product.
Black & Decker provides a facility for the collection and recycling of Black & Decker products once they have reached the end of their working life. To take advantage of this service please return your product to any authorised repair agent who will collect them on our behalf.
You can check the location of your nearest authorised repair agent by contacting your local Black & Decker office at the address indicated in this manual. Alternatively, a list of authorised Black & Decker repair agents and full details of
our
Internet at: www.2helpU.com.
Batteries
Black & Decker batteries can be recharged many times. At the end of their useful life, discard batteries with due care for our environment:
Run the battery down completely, then remove it from the tool.
NiCd and NiMH batteries are recyclable. Take them to any authorised repair agent or a local recycling station.
Technical data
|
| CHS6000 |
Voltage | Vdc | 6 |
1850 | ||
Stroke length | mm | 13 |
Max. Depth of cut |
|
|
Wood | mm | 25 |
Steel | mm | 2 |
Plastic pipe | mm | Ø 12 |
Weight | kg | 0.825 |
Charger |
|
|
Input voltage | Vac | 230 |
Approx. charging time | h | |
Weight | kg | 0.19 |
|
|
|
EC declaration of conformity
CHS6000
Black & Decker declares that these products conform to:
Standards & Legislation.
98/37/EC, 89/336/EEC, 73/23/EC, EN60745, EN60335,
EN55014, EN50336
LpA (sound pressure) 70.1 dB(A), LWA (acoustic power) 80.1 dB(A), hand/arm weighted vibration 1.4 m/s2 KpA (sound pressure uncertainty) 3 dB(A), KWA (acoustic power uncertainty) 3 dB(A)
Kevin Hewitt
Director of Consumer Engineering
Spennymoor, County Durham
DL16 6JG,
United Kingdom
6 |