Black & Decker BDCMTJS Operating Instructions, Installing and removing a saw blade Figure a

Page 4

Operating Instructions

WARNING: Shock hazard. Under no circumstances should this product be used near water. WARNING: Risk of lacerations or burns. Do not touch work piece or blade immediately after operating the tool. They can become very hot. Handle carefully. Always allow accessories

and work piece to cool before handling.

WARNING: To reduce the risk of injury, turn off and remove battery from tool or disconnect plug from power source before making any adjustments or removing or installing attachments or accessories.Remove any accessory from the attachment before removing or installing the attachment.

NOTE: Refer to Power Unit instruction manual before operating this tool for all safety warnings and details on installing and removing attachments.

Installing and removing a saw blade (Figure A)

WARNING: To reduce the risk of injury, turn off and remove battery from the tool or disconnect plug from power source before making any adjustments or removing or installing attachments or accessories.

•Access the lever (A1) through the back of the jig saw attachment.

•Press and hold the lever down with your thumb.

•Insert the saw blade into the blade clamp as shown. Make sure the teeth are pointing toward the slot opening in the saw shoe.

•Release the lever.

•To remove the saw blade, press and hold the lever (A1) down and pull the saw blade from the holder.

A

A1

Sawing

•To switch the tool on, press the variable speed switch on the power unit. The tool speed depends on how far you press the switch.

•To switch the tool off, release the variable speed switch.

•Always use the appropriate type of saw blade for the workpiece material and type of cut.

•If necessary, drill a hole in the workpiece near the starting point of the cut so the blade will fit before starting the cut.

NOTE: This attachment only operates in the forward direction, the forward/reverse slider of the Power Unit should not be able to be switched to reverse.

B

making a pocket cut (Figure b),

it is not necessary to drill a pilot hole:

• Mark the desired starting point.

• Tilt the tool forward and place the rounded front edge of the saw shoe on the workpiece.

• Switch the tool on and slowly feed the saw blade into the workpiece at the desired starting point.

cutting sheet metal

• Use a metal cutting blade. Clamp a piece of plywood or

soft wood to the back of the workpiece and saw through the combination in order to obtain a clear cut.

• Do not force the saw blade into the workpiece. Note that cutting sheet metal will normally take more time than sawing thicker

wooden workpieces.

• Spread a thin film of oil along the cutting line before sawing.

• To cut, place the front of shoe on the material to be cut. Hold the jig saw shoe firmly against the material while cutting. Don’t force the tool; let the blade cut at its own speed.

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Jig saw attachment Thank you for choosing Black+DeckerSymbol Signal Meaning FUNCTIONAL DESCRIPTION Installing and removing a saw blade Figure a Operating InstructionsSawing Cutting sheet metalTroubleshooting Full Two-Year Home Use Warranty Module de scie sauteuse Consignes de sécurité particulières Plus bas pour connaître le calibre approprié des rallonges Fonctionnement Installation et dépose d’une lame de scie Figure aSciage Dépannage EntretienInformation sur les réparations Aditamento de sierra caladora Normas específicas de seguridad Voltios Amperios Hertz Vatios Descripción funcional OperaciónAserrado Detección de problemas MantenimientoReemplazo DE LAS Etiquetas DE Advertencia Esta Garantia no Aplica Cuando Solamente Para Propositos DE Mexico
Related manuals
Manual 20 pages 10.86 Kb

BDCMTJS specifications

The Black & Decker BDCMTJS is a versatile and efficient tool designed for both DIY enthusiasts and professionals alike. This compact jigsaw tool is a part of the Black & Decker 20V MAX system, offering extensive compatibility with other tools in the lineup. This means users can share battery packs between various devices, enhancing convenience and reducing clutter in the workspace.

One of the standout features of the BDCMTJS is its lightweight design, which allows for easier handling and maneuverability during intricate cuts. Weighing in at just a few pounds, this jigsaw is ideal for those who need to work in tight spaces or for extended periods without experiencing fatigue. The ergonomic grip adds to user comfort, ensuring a secure hold during operation.

The BDCMTJS is equipped with a variable speed trigger, providing users with control over cutting speed. This feature is essential for making precise cuts in various materials such as wood, metal, and plastic. The jigsaw offers a stroke length that optimizes cutting efficiency and can handle a range of cutting tasks with ease.

Another key aspect of the BDCMTJS is its tool-free blade change system. This allows users to switch out blades quickly and easily without the need for additional tools, saving valuable time on the job site. The jigsaw accepts both T-shank and U-shank blades, giving users the flexibility to choose the right blade for their specific project requirements.

The BDCMTJS also features a built-in laser guide, which aids in aligning cuts with precision. This technology ensures that users achieve clean, straight cuts every time, enhancing the overall quality of their work. Additionally, the dust blower keeps the cutting line clear, improving visibility and accuracy during cutting operations.

Overall, the Black & Decker BDCMTJS jigsaw is a powerful, reliable, and user-friendly tool that is perfect for a variety of applications. Its combination of advanced features, compatibility with the 20V MAX system, and ease of use make it an excellent choice for anyone looking to tackle woodworking projects or renovations. With the BDCMTJS, users can enjoy the confidence of a high-quality tool that is designed to meet the demands of both professional and hobbyist environments.
Top Page Image Contents