OPERATION
Blade & Box Blade PRE-OPERATION Inspection
Blade ID#:_______________________Make:__________________________
Date: ___________________________Shift:___________________________
Before conducting the inspection, make sure the tractor engine is off, all rotation has stopped and the tractor is in park with the parking brake engaged. Make sure the blade is resting on the ground or securely blocked up and all hydraulic pressure has been relieved.
Item | Condition at | Specific Comments if | |
Start of Shift | not O.K. | ||
| |||
|
|
| |
The Operator’s Manual is in the Canister. |
|
| |
All Safety Decals are in place and legible. |
|
| |
The Hitch connection pins are properly retained. |
|
| |
There are no cracks in Hitch. |
|
| |
All frame bolts are in place and tight. |
|
| |
The blade swing, angle & tilts pins are properly lubricated |
|
| |
and retained. |
|
| |
The Blade edge & moldboard are clear of mud and debris. |
|
| |
The blade edge attachments bolts are in place and tight. |
|
| |
The blade edge is not chipped, cracked or bent. |
|
| |
The Storage Stands are in place & in good condition. |
|
| |
The skid shoes are in good condition. |
|
| |
The Hydraulic Cylinders pins are in place & retained. |
|
| |
There are no leaking or damaged hoses. |
|
| |
There is no evidence of Hydraulic leaks. |
|
| |
The gauge wheel(s) are in good condition & lubricated. |
|
| |
The scarifier shanks are properly retained. |
|
| |
The scarifier points are in good condition and retained. |
|
| |
Operator’s Signature:_____________________________________________________ | |||
DO NOT OPERATE an UNSAFE TRACTOR or IMPLEMENT
160 Series 08/10 | Operation Section |
© 2010 Alamo Group Inc.