Craftsman 71.74291 operating instructions To turn the tool off, Extending the Pole

Page 20

Figure 14

3.While holding the switch lockout under your thumb in the forward position, use your fingers to pull upward on the control trigger. (see figure 15) This will energize the saw and allow you to do your work. It is NOT necessary to keep pressure on the thumb switch after the tool has started.

Please note that the tool will not start if the lock rings are not in the fully locked position.

Figure 15

To turn the tool off:

1.Release the control and the tool will turn off. The thumb switch will return to the rearward position to prevent accidental re-starting of the tool.

OVERLOAD PROTECTION

The pole saw attachment incorporates a circuit breaker which will protect the hedge trimmer in the event of

a prolonged stall. This device will cause the tool to stop operating if an overload condition exists. If the pole saw becomes jammed on a branch, release the control trigger immediately. If, after clearing the jam, the pole saw does not restart, check to see if the circuit breaker has popped (see figure 16). The circuit breaker can be reset by simply waiting 30 seconds and then pushing it back in until it clicks. You may then resume normal trimming.

circuit breaker

Figure 16

EXTENDING THE POLE

To extend the pole, lay the pole saw on a horizontal surface. Hold the black hand grip on the bottom section of the pole with one hand while turning the red hand grip counterclockwise with the other hand. Slide the extension pole to the desired length and tighten by turning the red hand grip clockwise. (see figure 17)

Figure 17

CAUTION: Never adjust the pole

10

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Convertible Cordless 18V Power Handle Table of Contents To reduce risk of injury Operation Connecting Tool Attachment to the Power Handle Charging NotesAttaching the Battery Removing the BatteryOverload Protection To turn the tool onTo turn the tool off Maintenance Cleaning of Plastic PartsNeed More HELP? LE-FOYER MC SU-HOGARConvertible Cordless 18V Pole Saw Attachment Table of Contents Avoid Unintentional Starting Keep Tools Sharp and clean for better and safer performanceTo reduce risk of injury Keep Work Area Clean Never Operate the Pole SAWDo not CUT Down Trees with the pole saw Always Allow Space for limbs to fall freely to the groundGlossary of Terms Do not OverreachKeep Proper Footing and balance at all times Installing and Removing the SAW Chain Remove the sprocket cover, bar clamp and socket head screwsAdjusting SAW Chain Tension Connecting Pole SAW Attachment to the Power HandleTo attach the pole to the power handle Oiling the ChainTo attach the saw head to the pole To detach the saw head or pole Extending the Pole Pivoting the SAW Head Pruning with the Pole SAWOverhead Electrical Lines To Cut Branches From a TreeWall Bracket Properly. Local, state and federal laws Page Page Page Get it fixed, at your home or ours
Related manuals
Manual 22 pages 10.28 Kb Manual 22 pages 36.03 Kb

71.74291 specifications

The Craftsman 24074292 is a versatile and highly efficient tool that stands out in the realm of home improvement and DIY projects. This powerful tool is designed with durability and performance in mind, making it an essential addition to any toolbox.

One of the key features of the Craftsman 24074292 is its robust motor, which provides ample power for a wide range of applications. Whether you're undertaking heavy-duty tasks or light household repairs, this tool is designed to handle it all with ease. The motor is engineered to ensure longevity, reducing the need for frequent replacements and maintenance.

Incorporating advanced technologies, the Craftsman 24074292 features an ergonomic design that enhances user comfort and minimizes fatigue during extended use. The grip is padded and shaped to fit comfortably in your hand, allowing for better control and precision. This design aspect is particularly beneficial for users who spend long hours working on projects.

The tool boasts adjustable speed settings, which allow users to customize their performance according to the specific requirements of the task at hand. This feature not only enhances efficiency but also ensures that the tool can be used on a variety of materials, from wood and metal to plastic, catering to diverse project needs.

Additionally, the Craftsman 24074292 includes safety features that prioritize user protection during operation. These features may include a safety switch and protective guards that minimize the risk of accidents, providing peace of mind while working.

The build quality of the Craftsman 24074292 is another highlight, with high-grade materials used to ensure reliability and toughness. This ensures that the tool can withstand the rigors of daily use and adverse working conditions, making it suitable for both professionals and DIY enthusiasts.

Furthermore, the Craftsman 24074292 is compatible with a range of attachments and accessories, expanding its functionality and versatility. This adaptability makes it an ideal choice for users looking for a multifunctional tool that can evolve with their needs.

In summary, the Craftsman 24074292 is a well-rounded tool that combines power, safety, and ergonomics to support a variety of tasks. Its innovative features and reliable construction make it a worthwhile investment for anyone looking to enhance their toolkit with a dependable and efficient tool. Whether you're a novice or a seasoned professional, the Craftsman 24074292 is sure to meet your demands.
Top Page Image Contents