Craftsman 71.74291 operating instructions Operation

Page 4

See instructions on how to attach line guard in the Operation section of the line trimmer manual. Failure to attach the line guard may pose a risk of injury, may cause motor damage and will void the warranty.

USE A HARDHAT - Always wear a hardhat when cutting branches over- head with the pole saw to reduce the risk of injury from falling branches.

READ AND FOLLOW ALL SAFETY WARNING printed in the various tool attachment manuals.

To reduce risk when handling the battery:

DO NOT dispose of the battery in a fire. The cells may explode. Check with local code for possible special disposal instructions.

DO NOT open or mutilate the battery. Released electrolyte is corrosive and may cause damage to the eyes or skin. It may be toxic if swallowed.

EXERCISE CARE in handling batteries in order not to short the battery with conducting materials such as rings, bracelets and keys. The battery or conductor may overheat and cause burns.

To reduce risk when using charger:

DO NOT use charger outdoors or in wet conditions; use inside only.

DO NOT charge the unit when the temperature is below +40 F or above +120 F. It may lessen the service life of the battery.

This unit and its charger are designed to work together. DO NOT charge the battery with any other charger and DO NOT use this charger with any other yard tool or battery.

The charger is designed to operate on 120 volts. DO NOT attempt to use it at any other voltage.

Store these instructions by folding in

half and sliding into the slot in the back of the wall charging rack.

SAVE THESE INSTRUCTIONS

OPERATION

CHARGE BATTERY PRIOR TO USE - The battery does not come fully charged when purchased. Before using the unit, the battery must be charged. Before charging the battery, read safety and charging instructions.

PROPER RUN TIME AND PERFORMANCE can only be obtained with a fully charged battery.

CHARGE TIME - Charging for approximately 1 hour is sufficient to replenish the battery to a full charge. Initial use, long periods of inactivity, or storage at extreme temperatures may require extended charge time.

WALL CHARGE BRACKET - Before charging the unit, make sure the charge bracket is securely attached to the wall; attach with screws to a wall stud. The use of wall board anchors is NOT recommended.

To Charge Battery:

1.Plug the charger into a 120 Volt AC outlet.

2.Place the Power Handle with battery attached into the wall charge bracket. It is not necessary to remove the tool attachment when charging the battery. (see figure 1)

Figure 1

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Convertible Cordless 18V Power Handle Table of Contents To reduce risk of injury Operation Connecting Tool Attachment to the Power Handle Charging NotesAttaching the Battery Removing the BatteryTo turn the tool off To turn the tool onOverload Protection Maintenance Cleaning of Plastic PartsNeed More HELP? LE-FOYER MC SU-HOGARConvertible Cordless 18V Pole Saw Attachment Table of Contents To reduce risk of injury Keep Tools Sharp and clean for better and safer performanceAvoid Unintentional Starting Keep Work Area Clean Never Operate the Pole SAWDo not CUT Down Trees with the pole saw Always Allow Space for limbs to fall freely to the groundKeep Proper Footing and balance at all times Do not OverreachGlossary of Terms Installing and Removing the SAW Chain Remove the sprocket cover, bar clamp and socket head screwsAdjusting SAW Chain Tension Connecting Pole SAW Attachment to the Power HandleTo attach the pole to the power handle Oiling the ChainTo attach the saw head to the pole To detach the saw head or pole Extending the Pole Pivoting the SAW Head Pruning with the Pole SAWOverhead Electrical Lines To Cut Branches From a TreeWall Bracket Properly. Local, state and federal laws Page Page Page Get it fixed, at your home or ours
Related manuals
Manual 22 pages 10.28 Kb Manual 22 pages 36.03 Kb

71.74291 specifications

The Craftsman 24074292 is a versatile and highly efficient tool that stands out in the realm of home improvement and DIY projects. This powerful tool is designed with durability and performance in mind, making it an essential addition to any toolbox.

One of the key features of the Craftsman 24074292 is its robust motor, which provides ample power for a wide range of applications. Whether you're undertaking heavy-duty tasks or light household repairs, this tool is designed to handle it all with ease. The motor is engineered to ensure longevity, reducing the need for frequent replacements and maintenance.

Incorporating advanced technologies, the Craftsman 24074292 features an ergonomic design that enhances user comfort and minimizes fatigue during extended use. The grip is padded and shaped to fit comfortably in your hand, allowing for better control and precision. This design aspect is particularly beneficial for users who spend long hours working on projects.

The tool boasts adjustable speed settings, which allow users to customize their performance according to the specific requirements of the task at hand. This feature not only enhances efficiency but also ensures that the tool can be used on a variety of materials, from wood and metal to plastic, catering to diverse project needs.

Additionally, the Craftsman 24074292 includes safety features that prioritize user protection during operation. These features may include a safety switch and protective guards that minimize the risk of accidents, providing peace of mind while working.

The build quality of the Craftsman 24074292 is another highlight, with high-grade materials used to ensure reliability and toughness. This ensures that the tool can withstand the rigors of daily use and adverse working conditions, making it suitable for both professionals and DIY enthusiasts.

Furthermore, the Craftsman 24074292 is compatible with a range of attachments and accessories, expanding its functionality and versatility. This adaptability makes it an ideal choice for users looking for a multifunctional tool that can evolve with their needs.

In summary, the Craftsman 24074292 is a well-rounded tool that combines power, safety, and ergonomics to support a variety of tasks. Its innovative features and reliable construction make it a worthwhile investment for anyone looking to enhance their toolkit with a dependable and efficient tool. Whether you're a novice or a seasoned professional, the Craftsman 24074292 is sure to meet your demands.
Top Page Image Contents