Craftsman 315.21212 owner manual AMP Motor, See Figure

KNOW YOUR COMPOUND MITER SAW

See Figure 3.

Before attempting to use your saw, familiarize yourself with all operating features and safety requirements.

_i WARNING: Do not allow familiaritywith your saw to make you careless. Remember that a

careless fractionof a second is sufficientto inflict severe injury.

15 AMP MOTOR

Your saw has a powerful15 amp motorwith sufficient power to handle tough cuttingjobs. It is made with all hell bearings, and has extemally accessiblebrushes for ease of servicing.

12 in. BLADE

CUTTING CAPACITIES

When the miter angle (raRer table) Is set at 0° and the bevel angle Is set at 0°:

Your saw win cut materials up to:

max width x resultingheight 7-7/8 in. x 2-1/2 in.

When the miter angle (miter table) Is set at 45 ° and the bevel angle Is eat at O°:

Your saw will cut materials up to:

max width x resultingheight 5-1/2 in. x 2-1/2 in.

When the miter angle (miter table) Is set at O° and the bevel angle Is sat at 45°:

Your saw will cut materials up to:

max width x resultingheight 7-7/8 in. x 1-3/4 in.

A12 in. saw blade is includedwith your compound miter saw. it willcut materials up to 7-7/8 in. wide, depending upon the thicknessof the material and the 'settingat which the cut is being made.

SWITCH

LOCK-OFFLEVER

UPPER

BLADEGUARD

6 mm	DUSTGUIDE
HEXKEY

\

STORAGEAREA

HEXKEY __

MRER

TABLEFRAME

TRIGGER

LOWER

BLADEGUARD

MITERTABLE

"NOHANDSZONE" BOUNDARYMNE

	NOHANDS
	ZEROCLEARANCE
		PLATE
	'MRERSCALE
		MmER
	LOCKHANDLE
CONTROLARM	MITER
PosmvE STOP(S)	LOCKPLATE	Fig. 3

10