KNOW YOUR COMPOUND MITER SAW
See Figure 3.
Before attempting to use your saw, familiarize yourself with all operatingfeatures and safety requirements.
WARNING: Do not allow familiaritywith your saw to make you careless. Remember that a
careless fraction of a second is sufficientto inflict severe injury.
15 AMP MOTOR
Your saw has a powerful 15 amp motorwith sufficient power to handle tough cutting jobs. It is made with all ball beadngs, and has extemally accessiblebrushes for ease of servicing.
10 in. BLADE
A10 in. saw blade is included with your compound miter saw. It will cut matedais up to
material and the settingat which the cut is being made.
SWITCH
L_K_LEVER
UPPER
BLADEGUAND
DUSTGUIDE
CUTTING CAPACITIES
When the miter angle (miter table) Is set at O° and the bevel angle Is set at 0°:
Your saw will cut materials up to a maximum of
When the miter angle (miter table) Is set at 45° and the bevel angle Is set at 0°:
Your saw will cut matsdals up to a maximum of
When the miter angle (miter table) Is set at O° and the bevel angle is set at 45°:
Your saw will cut materials up to a maximum of
When the miter angle (miter table) Is set at 45 ° and the bevel angle is set at 45°:
Your saw will cut materials up to a maximum of
SWITCHTRIGGER
BLADEGUARD
BEVEL
LOCKKNOBMITERTABLE
)HANDS ZONELABEL
"NOHANDSZONE"
ZEROCLEARANCE 'LATE
LOCKPLATE
MITER .
CONTROLARM LOCKHANDLE
Posmvz_oP(_
Fig. 3
10