Full ONE Year Warranty, Know HOW to USE Tool

Warranty	2
Safety Rules	2-3
Unpacking	3
Installation	3-4
Operation	4
Maintenance	5
Troubleshooting	6
Parts Illustration and List	8-9
EspaSol	10-15

FULL ONE YEAR WARRANTY

if this product fails due to a defect in material or work- manship within one year from the date of purchase, Sears will at its option repair or replace it free of charge. Contact your nearest Sears Service Center

(1-800-4-MY-HOME) to arrange for product repair, or return this product to place of purchase for replace- ment.

If this product is used for commercial or rental purpos- es, this warranty will apply for 90 days from the date of purchase.

This warranty applies only while this product is used in the United States.

This warranty gives you specific legal rights and you may also have other rights which vary from state to state.

Sears, Roebuck and Co., Dept. 817WA, Hoffman Estates, IL 60179

WARNING: For your own safety, read all of the instructions and precautions before operating tool.

CAUTION: Always follow proper operating procedures as defined in this manual -- even if you are familiar

with use of this or similar tools. Remember that being careless for even a fraction of a second can result in

severe personal injury.

BE PREPARED FOR JOB

•Wear proper apparel. Do not wear loose clothing, gloves, neckties, rings, bracelets or other jewelry which may get caught in moving parts of machine.

•Wear protective hair covering to contain long hair.

•Wear safety shoes with non-slip soles.

•Wear safety glasses complying with United States ANSI Z87.1. Everyday glasses have only impact resistant lenses. They are NOT safety glasses.

•Wear face mask or dust mask if operation is dusty.

•Be alert and think clearly. Never operate power tools when tired, intoxicated or when taking medications that cause drowsiness.

PREPARE WORK AREA FOR JOB

•Keep work area clean. Cluttered work areas invite accidents.

•Do not use power tools in dangerous environments. Do not use power tools in damp or wet locations. Do not expose power tools to rain.

•Work area should be properly lighted.

•Proper electrical receptacle should be available for tool. Three-prong plug should be plugged directly into properly grounded, three-prong receptacle.

•Extension cords should have a grounding prong and the three wires of the extension cord should be of

the correct gauge.

•Keep visitors at a safe distance from work area.

•Keep children out of workplace. Make workshop childproof. Use padlocks, master switches or remove switch keys to prevent any unintentional use of power tools.

TOOL SHOULD BE MAINTAINED

•Always unplug tool prior to inspection.

•Consult manual for specific maintaining and adjust- ing procedures.

•Keep tool lubricated and clean for safest operation.

•Remove adjusting tools. Form habit of checking to see that adjusting tools are removed before switch- ing machine on.

•Keep all parts in working order. Check to determine that the guard or other parts will operate properly and perform their intended function.

•Check for damaged parts. Check for alignment of moving parts, binding, breakage, mounting and any other condition that may affect a tool'soperation.

•A guard or other part that is damaged should be properly repaired or replaced. Do not perform makeshift repairs. (Use parts list provided to order replacement parts.)

KNOW HOW TO USE TOOL

•Use right tool for job. Do not force tool or attachment to do a job for which it was not designed.

•Disconnect tool when changing abrasive wheel.

•Avoid accidental start-up. Make sure that the tool is in the "off" position before plugging in.

•Do not force tool. It will work most efficiently at the rate for which it was designed.

•Keep hands away from moving parts and cutting surfaces.

•Never leave tool running unattended. Do not leave tool until it comes to a complete stop.

•Do not overreach. Keep proper footing and balance.

•Never stand on tool. Serious injury could occur if tool is tipped or if abrasive wheel is unintentionally contacted.