Land Pride PR1560 manual Gauge Wheels, Setting the Working Depth, Powered Rake Roller, End Plates

Page 13

Land Pride

Section 3: Adjustments

Table of Contents

Gauge Wheels

Caster gauge wheels are mounted on the rear of the frame to control the height of the roller during field operation.

Setting the Working Depth

The operating depth is controlled by the caster gauge wheels and not the tractor. The Powered Rake is equipped with C-spacers on the gauge wheel spindles so that the gauge wheels do not have to be removed for adjustment. Simply remove the spacers at the cut outs at the bottom of the gauge wheel spindles as shown in Figure 3-1. Move the gauge wheels up for greater depth or move them down for less depth. To allow for weight the gauge wheel on the chain case side should be approximately 1 inch lower than the non-drive side gauge wheel for best results.

18014

Depth Adjustment

Figure 3-1

Powered Rake Roller

The roller is powered by a roller chain attached to a sprocket mounted on a driveline that runs off the gearbox. A hydraulic cylinder angles the roller frame 20 degrees in either direction for windrowing material to the side. There are two roller options available. The scrolled roller is designed for hard rocky ground to scrape rocks out of the top few inches of dirt. The roller and material control deflector, screen the material for unwanted rocks and debris while letting through finely sifted dirt. The carbide enhanced tuff studs roller is for ground preparation. The tuff studs roller can also be used to rip away low growing vegetation.

Drive Chain Adjustment

!CAUTION

BEFORE any maintenance is performed, lower the Powered Rake to the ground, stop tractor engine and remove the key. DO NOT attempt to make maintenance adjustments while tractor is running.

1.If the chain should become loose, either the spring on the idler arms or the chain needs to be replaced. See “Sprocket and Drive Chain Replacement” page 12.

End Plates

End plates are utilized to gather and keep rocks and debris in front of the roller to distribute the material to fill in low spots. End plates can be removed and stored on the unit for final grading as shown in Figure 3-2.

18646

End Plates (Not in use)

Figure 3-2

Material Control Deflector

Adjustment

A material control deflector is mounted above the roller so control can be established over both the size and shape of the materials being cleaned or raked. The gap between the material control deflector and the rake roller can be adjusted to widen or narrow the opening. A wider opening will allow more dirt and rock to pass through. A narrow opening will allow for finer raking.

The height of the material control deflector can be adjusted by loosening the bolts (A) and rotating the material control deflector (B) to desired height. Refer to Figure 3-3.

A B

18600

Material Control Deflector Adjustment

Figure 3-3

7/14/08

PR1560 & PR1572 Powered Rakes 314-164M

11

Image 13
Contents Powered Rakes Table of Contents Look For The Safety Alert Symbol Safety at All TimesUse Safety Lights and Devices Important Safety InformationPractice Safe Maintenance Transport Machinery SafelyWear Protective Equipment Prepare for EmergenciesAvoid High Pressure Fluids Hazard 818-543C Safety Labels818-254C 838-094C818-603C 818-255C 838-111C818-229C 818-552C 818-230C818-540C 818-130C818-552C Application Using This ManualOwner Assistance IntroductionDriveline Installation Gauge Wheel Assembly PR1572Assembly and Set-Up Tractor RequirementsTransporting Operating ChecklistOperating Instructions OperatingPowered Rake Roller Setting the Working DepthDrive Chain Adjustment Material Control Deflector AdjustmentDrive Chain Maintenance MaintenanceChain Case Skid Shoe Replacement Sprocket & Drive Chain ReplacementPlate Assembly Plate DisassemblyStep Hours LubricationPivot Gauge Wheel SpindleDrive Chain RequiredNon-Drive Bearing GearboxSpecifications & Capacities PR1560 & PR1572 Powered RakesEnd plates with storage Features & BenefitsTroubleshooting Tire Inflation Chart Torque Values ChartAppendix 20 PR1560 & PR1572 Powered Rakes 314-164M Overall Unit and Driveline One year Parts and Labor Limited WarrantyCorporate Office P.O. Box Salina, Kansas 67402-5060 USA

PR1560 specifications

The Land Pride PR1560 is an exceptional piece of equipment that has become increasingly popular among landowners and farmers seeking an efficient and reliable rotary cutter. Designed for versatility and durability, the PR1560 is perfect for clearing overgrown fields, managing underbrush, and maintaining pastures. Its robust construction and innovative features make it a go-to choice for a variety of mowing applications.

One of the main features of the Land Pride PR1560 is its cutting width of 60 inches, allowing operators to cover large areas in a relatively short amount of time. This size is ideal for both residential and commercial applications, making it suitable for everything from homeowners maintaining rural properties to professional landscapers. The rotary cutter is designed to handle tough grass and light brush, effectively tackling dense vegetation with ease.

The PR1560 incorporates a heavy-duty design that ensures longevity and reliable performance. Built with a solid steel frame and reinforced sidebands, it can withstand the rigors of regular use. The cutter features a balanced rotor that helps reduce vibrations, providing operators with a smoother mowing experience. In addition, the cutting blades are crafted from high-strength steel, which can provide a clean cut while resisting wear and tear.

In terms of technology, the Land Pride PR1560 employs a slip clutch protection system, which helps to protect the drive train during unexpected encounters with rocks or other obstacles. This technology reduces the likelihood of damage to the rotary cutter, thus minimizing maintenance costs and enhancing the overall lifespan of the equipment. Operators can also easily adjust the cutting height, ranging from 1 to 4 inches, to achieve their desired mowing results.

Another significant characteristic of the PR1560 is its compatibility with a range of tractors. It features an easy-to-use three-point hitch system, which allows for quick attachment and detachment. This ease of use ensures that operators can switch between tasks efficiently, maximizing productivity.

In summary, the Land Pride PR1560 rotary cutter is an outstanding choice for anyone in need of a robust and efficient mowing solution. Its durable construction, advanced features, and compatibility with various tractors make it a versatile asset for land maintenance and management. Whether you’re tackling overgrown fields or maintaining pastures, the PR1560 delivers the performance and reliability that operators demand.