Land Pride PR1560 manual Safety at All Times, Look For The Safety Alert Symbol

Page 3

Land Pride

Table of Contents

Important Safety Information

These are common practices that may or may not be applicable to the products described in this manual.

Safety at All Times

Thoroughly read and understand the instructions given in this manual before operation. Refer to the “Safety Label” section, read all instructions noted on them.

Do not allow anyone to operate this equipment who has not fully read and comprehended this manual and who has not been properly trained in the safe operation of the equipment.

Look For The Safety Alert Symbol

The SAFETY ALERT SYMBOL indicates there is a

!safety precaution must be taken. When you see this symbol, be alert and carefully read the message that follows it. In addition to design and configuration of equipment, hazard control and accident prevention are dependent upon the awareness, concern, prudence and proper training of personnel involved in

the operation, transport, maintenance and storage of equipment.potential hazard to personal safety involved and extra

▲ Operator should be familiar with

all functions of the unit.

▲ Operate implement from the

driver’s seat only.

▲ Make sure all guards and shields

are in place and secured before

operating the implement.

▲ Do not leave tractor or implement

unattended with engine running.

▲ Dismounting from a moving

tractor could cause serious injury

or death.

▲ Do not stand between the tractor

and implement during hitching.

▲ Keep hands, feet, and clothing

away from power-driven parts.

▲ Wear snug fitting clothing to avoid

entanglement with moving parts.

▲ Watch out for wires, trees, etc.,

when raising implement. Make

sure all persons are clear of

Be Aware of

Signal Words

A Signal word designates a degree or level of hazard seriousness. The signal words are:

!DANGER

Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. This signal word is limited to the most extreme situations, typically for machine components that, for functional purposes, cannot be guarded.

!WARNING

Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury, and includes hazards that are exposed when guards are removed. It may also be used to alert against unsafe practices.

!CAUTION

Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. It may also be used to alert against unsafe practices.

working area.

▲ Turning tractor too tight may

cause implement to ride up on

wheels. This could result in injury

or equipment damage.

For Your Protection

▲Thoroughly read and understand the “Safety Label” section, read all instructions noted on them.

Shutdown and Storage

▲Lower machine to ground, put tractor in park, turn off engine, and remove the key.

▲Detach and store implements in a area where children normally do not play. Secure implement by using blocks and supports.

OFF

7/14/08

PR1560 & PR1572 Powered Rakes 314-164M

1

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Powered Rakes Table of Contents Look For The Safety Alert Symbol Safety at All TimesTransport Machinery Safely Important Safety InformationUse Safety Lights and Devices Practice Safe MaintenancePrepare for Emergencies Wear Protective EquipmentAvoid High Pressure Fluids Hazard 838-094C Safety Labels818-543C 818-254C818-603C 818-255C 838-111C818-229C 818-552C 818-230C818-130C 818-540C818-552C Introduction Using This ManualApplication Owner AssistanceTractor Requirements Gauge Wheel Assembly PR1572Driveline Installation Assembly and Set-UpOperating Operating ChecklistTransporting Operating InstructionsMaterial Control Deflector Adjustment Setting the Working DepthPowered Rake Roller Drive Chain AdjustmentSprocket & Drive Chain Replacement MaintenanceDrive Chain Maintenance Chain Case Skid Shoe ReplacementPlate Disassembly Plate AssemblyStep Gauge Wheel Spindle LubricationHours PivotGearbox RequiredDrive Chain Non-Drive BearingSpecifications & Capacities PR1560 & PR1572 Powered RakesEnd plates with storage Features & BenefitsTroubleshooting Torque Values Chart Tire Inflation ChartAppendix 20 PR1560 & PR1572 Powered Rakes 314-164M Overall Unit and Driveline One year Parts and Labor Limited WarrantyCorporate Office P.O. Box Salina, Kansas 67402-5060 USA

PR1560 specifications

The Land Pride PR1560 is an exceptional piece of equipment that has become increasingly popular among landowners and farmers seeking an efficient and reliable rotary cutter. Designed for versatility and durability, the PR1560 is perfect for clearing overgrown fields, managing underbrush, and maintaining pastures. Its robust construction and innovative features make it a go-to choice for a variety of mowing applications.

One of the main features of the Land Pride PR1560 is its cutting width of 60 inches, allowing operators to cover large areas in a relatively short amount of time. This size is ideal for both residential and commercial applications, making it suitable for everything from homeowners maintaining rural properties to professional landscapers. The rotary cutter is designed to handle tough grass and light brush, effectively tackling dense vegetation with ease.

The PR1560 incorporates a heavy-duty design that ensures longevity and reliable performance. Built with a solid steel frame and reinforced sidebands, it can withstand the rigors of regular use. The cutter features a balanced rotor that helps reduce vibrations, providing operators with a smoother mowing experience. In addition, the cutting blades are crafted from high-strength steel, which can provide a clean cut while resisting wear and tear.

In terms of technology, the Land Pride PR1560 employs a slip clutch protection system, which helps to protect the drive train during unexpected encounters with rocks or other obstacles. This technology reduces the likelihood of damage to the rotary cutter, thus minimizing maintenance costs and enhancing the overall lifespan of the equipment. Operators can also easily adjust the cutting height, ranging from 1 to 4 inches, to achieve their desired mowing results.

Another significant characteristic of the PR1560 is its compatibility with a range of tractors. It features an easy-to-use three-point hitch system, which allows for quick attachment and detachment. This ease of use ensures that operators can switch between tasks efficiently, maximizing productivity.

In summary, the Land Pride PR1560 rotary cutter is an outstanding choice for anyone in need of a robust and efficient mowing solution. Its durable construction, advanced features, and compatibility with various tractors make it a versatile asset for land maintenance and management. Whether you’re tackling overgrown fields or maintaining pastures, the PR1560 delivers the performance and reliability that operators demand.
Top Page Image Contents