Transportation, Storage, Maintenance Disposal

BM46I

4. For safe operation

•	Keep spray materials locked up and out
	of reach of children and animals.
• Use only original manufacturer’s
	replacement parts.
•	As a rule, mix your chemicals in a
	separate container from which to fill the

5. When replacing the any other part, or any lubricant, always be sure to use only RedMax products or products which have been certified by RedMax for use with the RedMax product.

6. In the event that any part must be replaced

sprayer. Do not mix formulas inside the

sprayer. Where an exception is made

(e.g. with liquid fertilizers), fill sprayer

with water BEFORE adding the active

ingredient.

or any maintenance or repair work not described in this manual must be performed, please contact a representative from the store nearest RedMax authorized servicing dealer for assistance.

•	Always sift formula through the screen.
	If there is no built-in strainer, use a
	screened funnel.
•	Never fill the sprayer with hot liquids.
	Max. 30°C, or 85°F.
•	Never use gasoline or other flammable
	materials.
• Before cleaning or servicing the sprayer,
	allow all pressure to escape. Do not
	store or transport sprayer under
	pressure.
•	After each use, wash the sprayer—
	including hose, lance and shut-off
	valve—with plenty of fresh water. Unless
	spraying is to be continued within hours,
	drain chemical formula and thoroughly
	rinse the tank and all liquid ducts.
•	Never store chemicals in your sprayer
	for any length of time
•	Do not leave the sprayer in reach of
	children or persons not qualified to
	handle it in proper fashion.
•	When not in use—and especially during
	prolonged storage—keep your sprayer
	in a protected place away from direct
	solar heat.
•	Make sure the spray hose loops freely
	without kinking or squeezing.
4. After using sprayers and other equipment,
CLEAN UP! Dispose of debris in trash
receptacles.

7.Do not use any accessory or attachment other than those bearing the RedMax mark and recommended for the unit.

8.Under no circumstances should you ever take apart the product or alter it in any way. Doing so might result in the product becoming damaged during operation or the product becoming unable to operate properly.

■TRANSPORTATION

•Clean and rinse tank and spraying assembly after each use to prevent crystallizing, which would later cause clogging and chemical damage to the unit.

•Drain the content from the tank before transporting or storing the sprayer.

•Secure the unit carefully to prevent movement when it is transported.

•A unit that receives a strong shock during transport and unloading may malfunction.

■STORAGE

•Clean and rinse tank and spraying assembly after each use to prevent crystallizing, which would later cause clogging and chemical damage to the unit.

•Do not store sprayer under pressure, or with spray solution in tank.

•When storing the sprayer, choose a space indoors free from moisture and out of the reach of children.

■ MAINTENANCE

■ DISPOSAL

1.In order to maintain your product in proper working order, perform the maintenance and checking operations described in the manual at regular intervals.

2.Examine the sprayer at intervals for loose fasteners and rusted or damaged parts.

Use special care for chemical leakage.

3Clean and rinse tank and spraying assembly after each use to prevent

crystallizing, which would later cause clogging and chemical damage to the unit.

4.All service except for those described in this manual should be performed by competent service personnel.

•When disposing your machine, or chemical, be sure to allow your local regulations.

US-5