RedMax AG2300 manual Before Long-term Storage

Page 13

Storage

■Before Long-term Storage

•Drain fuel tank and run engine out until all fuel in the carburetor is used up.

•Remove the spark plug and drop a spoonful 2 cycle oil into the cylinder. Crank the engine several times and replace the plug.

Pull starter until compression is felt.

•Brush off dirt from the drill surface and apply rust protective oil.

•Store the machine in a dry, dust-free place.

13 

Image 13

Contents 3898-93110 AG2300Safety First Contents  4  Safety PrecautionsWork gear and clothing Things to check before starting up the engine Things to check before using your power augerThings to be careful about when using your power auger  8  Recommended Mixing Ratio Gasoline 32OIL FuelThrottle Cable Adjustment Installing DrillOperation Starting EngineStopping Engine Adjustment of Idling SpeedDrilling Replacement plug Champion RCJ6Y Inspection every 100 hours MaintenanceInspection every 25 hours Before Long-term Storage StorageModel Name AG2300 SpecificationsParts List Parts List AG2300 AG2300 Drill and Accessory Group  19  Engine Group  21  Carburetor Group  23  There are no other express warranties Year Limited Warranty