Norton Abrasives C9 owner manual Preparation, Safety Precautions, Hazard Symbols

Page 4

I. PREPARATION

A. Safety Precautions

Important! The following safety precautions must always be observed.

Hazard Symbols

Fuel (gasoline) is extremely flammable and its vapors can explode if ignited. Store gasoline only in approved containers, in well- ventilated, unoccupied approved areas, and away from sparks or flames. Do not fill the fuel tank while the engine is hot or running. Do not start the engine near spilled fuel. Never use the

fuel as a cleaning agent

Engine components can get extremely hot from operation. To prevent burns, do not touch the engine or related parts while the engine is running or immediately after it is turned off. Never operate the engine with any heat shields or guards removed.

Keep all guards in place when operating any piece of equipment

Keep hands, feet, hair, and clothing away from all rotating parts

Lethal Exhaust Gas use only in well ventilated areas. Engine exhaust gases contain poisonous carbon monoxide, which is orderless, colorless, and can cause death if inhaled. Avoid inhaling exhaust fumes, and never run the engine in a closed building or confined area

Never tamper with the governor components of settings to increase the maximum speed. Severe personal injury and damage to the engine or equipment can result if operated at speed above maximum. Always obey the maximum speed rating of blade.

DO NOT LIFT THE SAW BY THE HANDLE BARS

4

Image 4
Contents Small Concrete Saw Warranty Use Only Clipper Diamond Blades Hazard Symbols Safety PrecautionsPreparation Dust and Silica Warning You Are Responsible For Your Safety Assembly C9 Series Concrete Saw Specifications Dimensions/WeightCharacteristics EngineInstalling the Blade II. OperationEngine Pointer AlignmentStarting the Engine Water SupplyOperating the Saw Cutting Technique Additional Guide Lines For SawingIII. Maintenance Dry Cutting Engine Maintenance BearingsBelts Remember, too much tension shortens belt Bearing lifeDepth Control Ordering Information IV. Parts List SectionDescription Part Number C9 Parts Drawing C9 Parts Drawing Service Parts List C9 Page Norton Construction Products PO Box Gainesville, GA