Sinclair PG-21 manual Troubleshooting Problem Cause Solution

Page 13

TROUBLESHOOTING

 

 

PROBLEM

CAUSE

SOLUTION

THE MACHINE DOES

Make sure the air inlet is connected

Connect It

NOT OPERATE WHEN

to the compressor.

 

PRESSING THE FOOT

Make sure the air inlet is in the

Open The Handle

PEDAL.

open position.

 

 

Make sure the correct air pressure

Make sure the compressor is

 

is supplied

supplying the correct air pressure.

DEFECTIVE GROMMETING.

The bottom die is worn out or

Replace.

 

broken.

 

 

Incorrect tightness of setting.

See adjustments section of manual.

 

Incorrect adjustment of pneumatic

The manometer must indicate a

 

pressure.

minimum pressure of 6 kg.

 

 

 

IT WILL NOT CUT OR LEAVE

The bottom die or the top set

Replace it with a new one.

MATERIAL RESIDUALS.

spindle are worn or broken.

 

 

Incorrect tightness of setting.

See adjustments section of manual.

 

 

 

THE RING GUARD COMES

The height of the ring guard is not

See the ring guard adjustment

DOWN, BUT THE DIE DOES

adjusted properly.

section of manual.

NOT.

 

 

 

 

 

13

Image 13
Contents Model PG-21 Identification of the Machine Description of the Machine and ITS Operation Remember the Machine Must not be Overturned Before Starting the MACHINE, Read These Warnings Carefully Machine Description Setting UP the Machine for ITS Operation Changing the top-set spindle #218 and the top die #217 Page Ring Guard Adjustments 238 217 219 194 230 306 260 Maintenance Troubleshooting Problem Cause Solution Schematic # Part# Description Schematic # Part# Description Schematic # Part# Description Schematic # Part# Description Schematic # Part# Description Tools And Parts