Specifications
Battery Specifications
Type | 18VDC, NiCd, 1.3Ah |
|
|
Circular Saw Specifications
Max. RPM | 4000 RPM | |
|
| |
Blade | ||
|
| |
Arbor | 10MM | |
|
| |
Max Cutting | ||
Depth | ||
| ||
Cutting Angle | 0 to 45° |
Reciprocating Saw Specifications
Blades | Two |
Stroke Length | 7/8” |
Drill Specifications
Max. RPM | 600 RPM |
|
|
Chuck | 3/8” Keyless Type |
|
|
Torque | 23 Torque Settings/ |
Settings | 1 Drill Setting |
Flashlight Specifications
Switch | Push Button On/Off |
|
|
Bulb Type | 9 LEDs |
|
|
Head Positions | 7 |
|
|
Charger Specifications
Input Power | 120V / 60 Hz |
Output Power | 22VDC (max.) / 400mA |
LED Indicator | Red when charging; |
Light | Green when fully charged, |
Charge Time | 3 - 5 hours |
|
|
Unpacking
When unpacking, check to make sure that the item is intact and undamaged. If any parts are missing or broken, please call Har- bor Freight Tools at the number shown on the cover of this manual as soon as possible.
Instructions for putting
into use
Read the entire Important Safety Information section at the beginning of this manual including all text under subheadings therein before set up or use of this product.
To prevent serious injury
from accidental operation:
Turn the Power Switch of the tool to its “OFF” position and unplug the tool from its Battery Pack (1) before assembling or making any adjustments to the tool.
To prevent serious injury from flying shrapnel:
Do not use any abrasive wheels on the circular saw. The saw and its guards are not designed to accommodate abrasive wheels.
Note: For additional information regarding the parts listed in the following pages, refer to the Assembly Diagram near the end of this manual.
SKU 66755 | For technical questions, please call | Page 11 |