Micron Technology AU8000 manual Table of Contents

Page 2

TABLE OF CONTENTS

1.	INTRODUCTION		1
2.	SPECIFICATION		1
3.	ASSEMBLY		2
4.	OPERATION		3
	4.1	Operation of Standard Sprayer	3
	4.2	Operation of Sprayer with Chemical Pump	5
	4.3	Operation of Sprayer with Filling Pump	6
5.	HEALTH AND SAFETY		6
6.	CALIBRATION		8
	6.1	Output Rate of Chemical	8
	6.2	Adjustment of Droplet Size	12
7.	MAINTENANCE		13
	7.1	Knapsack Mistblower – Routine Maintenance	14
	7.2	Possible Engine Faults and Remedies	14
	7.3	Maintenance of Sprayhead	16
8.	PARTS LISTS		18
	8.1	AU8000 Sprayhead	18
9.	8.2	AU8000 Atomiser	20
9.	CONVERSION FACTORS		22

Image 2

Contents Sprayer Table of Contents AU8000 Sprayhead SpecificationIntroduction Tank and BlowerAssembly Operation Operation of Standard SprayerMicronair AU8000 Sprayer Operation of Sprayer with Chemical Pump Controls for Pump and Suction Filling ValveHealth and Safety Operation of Sprayer with Filling PumpMicronair AU8000 Sprayer Calibration Output Rate of ChemicalCoverage of Sprayer Swath Width Metres Litre/tree Adjustment of Droplet Size Maintenance Setting Marks on BladeKnapsack Mistblower Routine Maintenance Possible Engine Faults and RemediesUnsteady Engine RPM or Tendency to Stop Maintenance of Sprayhead Micronair AU8000 Sprayer Parts Lists Description QuantityAU8000 Sprayhead AU8000 Atomiser AU8000 Atomiser Conversion Factors