Accessories

G6261—Campbell Hausfeld™ Water Filter

Filtering out water and oil before it reaches the spray gun is critical for high quality spraying results. This filter is rated at 150 PSI maximum air pressure, and has a 1⁄4" NPT air inlet.

Figure 10. G6261 Campbell Hausfeld™

water filter.

G8114—3⁄8" x 25 Ft. Air Hose

G8115—3⁄8" x 50 Ft. Air Hose

G8116—3⁄8" x 100 Ft. Air Hose

We recommend dedicating an air hose for spraying use only, keeping it clean and free of water and oil by using a filter on the incoming end. Multi-purpose red rubber air hose is flexible and abrasion resistant. Features 200 PSI rating, 800 PSI bursting strength, and 1⁄4" NPT ends.

Figure 11. Red rubber air hose.

H7274—Campbell Hausfeld™ Pressure Regulator

Since PSI drops through lengths of air hose, attaching a regulator directly to the spray gun ensures accurate air regulation for the best results possible. Provides regulated output pressure of 0 to 125 PSI for proper tool operation. Locking pressure knob prevents accidental adjustments. 15 SCFM flow capacity @ 90 PSI. 1⁄4" NPT.

Figure 12. H7274 Campbell Hausfeld™

pressure regulator.

H3275—1⁄4" NPT x 25' Recoil Hose H3276—1⁄4" NPT x 50' Recoil Hose These recoil hoses are great dedicated air hoses because they are extremely light weight and maneuverable, which makes hours of spraying less tiring on wrists and arms.

Figure 13. H3275 Coil Hose.

Model H8222 Spray Gun

-9-