●Submerge all of the components into a cleaning fluid compatible with the fluid being sprayed.
●Thoroughly clean all of these parts. Lightly oil the piston and slide it in and out of the cylinder to
distribute the oil over the mating parts, reassemble all of the components to their original
positions (see page 8).
MAINTENANCE AND REPAIR
Please be aware that certain parts of this Paint Sprayer will wear, requiring replacement and that these parts are not covered by guarantee. These parts include the Valve Assembly (3a), Nozzle (1 & 2), Piston and Spring (3b & 3c). The wear on these parts depends on the abrasiveness of the paints being sprayed. You would normally expect to replace an atomiser valve after spraying between
A worn valve will cause a poor spray pattern and will require replacing. Replacement valves are available from the Earlex Service Department (see page 11 for contact details).
You will need to check the spray nozzles, Piston and Spring from time to time to check for wear. Replace if necessary.
NEVER DISPOSE OF PAINTS OR SOLVENTS INTO DRAINS. CONTACT YOUR LOCAL COUNCIL TO ARRANGE COLLECTION.
9