Echo MS-40BD manual Applications & USE for Your Sprayer, Sprayer Components & USE Information

Page 3

APPLICATIONS & USE FOR YOUR SPRAYER

Avoid using a sprayer for general cleaning purposes if plant protection or herbicide chemicals have already been used in the sprayer. If a sprayer has been used for plant protection or as an herbicide, clean the sprayer completely (see cleaning section) before using.

Plant Food: Use different spray patterns for optimum foliage feeding or for fungicide and pesticide application.

Herbicides: Reduce weeds and unwanted plants but avoid using the same sprayer for plant feeding or protection without thoroughly cleaning (see cleaning section) the sprayer first. General Household Use: Apply detergents, vinegar, cleaning solutions, warm water (do not exceed 120°F/49°C) or nontoxic household cleaning chemicals for carpets, floors, walls, glass, counter tops and ceilings. DO NOT use sprayer that has been used with herbicides, pesticides or other toxic chemicals for household applications.

General Outdoor Use: Use the sprayer for cleaning windows or with a detergent for general purpose cleaning. Other applications include wood preservatives, waxes, water proofing, and diluted household bleach (max. 1 part household bleach to 9 parts water solution).

SPRAYER COMPONENTS & USE INFORMATION

NOZZLE ASSEMBLY

Figure 1-2

Unscrew the nozzle cap (1) from the nozzle body (3) with retaining nut (2) fastened tightly to the elbow (5). Unscrew the retaining nut (2). Push the nozzle body (3) with the nozzle gasket

(4)out of the retaining nut (2). To reinstall the nozzle, reverse the above instructions.

Figure 3

Unscrew the retaining nut from the elbow and push the fan nozzle tip and gasket out of the retaining nut. To reinstall the nozzle, reverse the above instructions.

1. Poly

1. Brass

 

Nozzle Cap

 

Nozzle Cap

 

 

 

 

2. Retaining

2. Retaining

 

Nut

Nut

 

3. Nozzle

3. Nozzle

 

Body

 

Body

 

 

 

4. Nozzle

4. Nozzle

 

Gasket

 

Gasket

 

 

 

5. Elbow

5. Elbow

 

Figure 1

Figure 2

WAND ASSEMBLY

1.Make sure the o-ring is installed on the end of the wand. Insert the wand into shut-off valve.

2.Turn and tighten the retaining nut clock-wise onto the shut-off valve.

Retaining Nut

Wand

O-ring

Shut-off

 

 

 

Valve

Retaining Nut

Fan Nozzle Tip

Nozzle

Gasket

Elbow

Figure 3

2E

Image 3
Contents Backpack Rules for Safe Operation Wash hands after handlingSprayer Components & USE Information Nozzle AssemblyWand Assembly Applications & USE for Your SprayerWand Clip Installing the Pump HandleInstalling Shoulder Strap Stowaway Pump HandleFilling the Sprayer Stage Filtering SystemCleaning Helpful Spraying InformationPOWDER-BASED Chemicals Storing / Maintaining Your Sprayer Trouble Shooting Your SprayerDisassembling and Replacing the Diaphragm Pump In-tank Filter Clamp Pressure Cylinder o-ring Disassembling and Repairing the Pump AssemblyDisassembling and Repairing the Shut OFF Valve Removed with pliers and cleaned figNozzle Assembly Replacement Parts Order InformationECHO, Incorporated Exceptions