Graco 312414D important safety instructions Fire and Explosion Hazard

Page 5

Warnings

Warnings

The following warnings are for the setup, use, grounding, maintenance, and repair of this equip- ment. The exclamation point symbol alerts you to a general warning and the hazard symbol refers to procedure-specific risk. Refer back to these warnings. Additional, product-specific warnings may be found throughout the body of this manual where applicable.

WARNING

FIRE AND EXPLOSION HAZARD

Flammable fumes, such as solvent and paint fumes, in work area can ignite or explode. To help prevent fire and explosion:

• Use equipment only in well ventilated area.

• Eliminate all ignition sources; such as pilot lights, cigarettes, portable electric lamps, and plastic drop cloths (potential static arc).

Keep work area free of debris, including solvent, rags and gasoline.

Do not plug or unplug power cords or turn lights on or off when flammable fumes are present.

Ground all equipment in the work area. See Grounding instructions.

If there is static sparking or you feel a shock, stop operation immediately. Do not use equipment until you identify and correct the problem.

Keep a working fire extinguisher in the work area.

EQUIPMENT MISUSE HAZARD

Misuse can cause death or serious injury.

Do not operate the unit when fatigued or under the influence of drugs or alcohol.

Do not exceed the maximum working pressure or temperature rating of the lowest rated system component. See Technical Data in all equipment manuals.

Use fluids and solvents that are compatible with equipment wetted parts. See Tech- nical Data in all equipment manuals. Read fluid and solvent manufacturer’s warn- ings. For complete information about your material, request MSDS forms from distributor or retailer.

Check equipment daily. Repair or replace worn or damaged parts immediately with genuine manufacturer’s replacement parts only.

Do not alter or modify equipment.

Use equipment only for its intended purpose. Call your distributor for information.

Route hoses and cables away from traffic areas, sharp edges, moving parts, and hot surfaces.

Do not kink or over bend hoses or use hoses to pull equipment.

Keep children and animals away from work area.

Comply with all applicable safety regulations.

312414D

5

Image 5
Contents Instructions-Parts Important Safety InstructionsContents General Metal with Stainless Steel Tip ModelsAutomotive General Metal Spray GunsWaterborne StainHigh Wear AdhesivesFire and Explosion Hazard Conventional Guns Gun SelectionHvlp Guns Compliant GunsFlush Before Using Equipment SetupConnect Air and Fluid Lines Ground the GunAdjust Spray Pattern Operation Pressure Relief ProcedureApply Fluid Volatile Organic Compounds VOC RegulationSee Compliant Cleaning Methods Daily Gun MaintenanceGeneral Tasks FlushCompliant Cleaning Methods Clean GunProblem Cause Solution TroubleshootingRight WrongProblem Cause Solution Repair DisassemblyFollow Pressure Relief Procedure, Reassembly Parts Needle Part DescriptionParts Accessories General Metal with Stainless Steel Tip Repair KitsGeneral Metal Spray Guns Stain AutomotiveSpatter AdhesivesWaterborne High WearAir Consumption Technical DataAir Inlet Pressure Spray Type Application Psi MPa, bar ScfmGraco Headquarters Minneapolis Graco Standard WarrantyGraco Information

312414D specifications

The Graco 312414D is a top-tier airless paint sprayer designed specifically for both DIY enthusiasts and professional painters. This versatile sprayer stands out for its efficiency, ease of use, and innovative technologies that make it a valuable tool for any painting job.

One of the main features of the Graco 312414D is its ability to handle a variety of coatings, including paints, stains, and sealers. This makes it ideal for a range of applications, from small indoor projects to larger exterior jobs. With its powerful motor, it can deliver a consistent spray pattern, allowing for a smooth and even application, reducing the risk of overspray and ensuring that surfaces receive a flawless finish.

The unit is equipped with Graco's advanced ProConnect technology, which allows users to easily change out the pump in just a few minutes. This feature minimizes downtime, enabling painters to complete their tasks more efficiently. Additionally, the Graco 312414D features a durable and robust construction, which ensures long-lasting performance, even under heavy use.

Another significant characteristic of the Graco 312414D is its adjustable pressure control, which provides users with the flexibility to customize the spray to suit different materials and surfaces. This feature allows for finer control and reduces waste, making projects more cost-effective. The gun's ergonomic design ensures comfortable handling and reduces fatigue, allowing users to work for extended periods without discomfort.

The sprayer also includes a tip guard and a reversible tip for quick unclogging, which increases usability and minimizes interruptions during painting. Graco’s FlexLiner bag system allows for easy cleanup and helps reduce material waste, making it an eco-friendly choice for painters.

In summary, the Graco 312414D airless paint sprayer is a reliable and efficient tool that offers advanced features and technologies tailored for a variety of painting applications. Its durability, ease of use, and adjustable settings make it a top choice for both professionals and home decorators alike, ensuring exceptional results every time. Whether you're tackling a small room or an entire exterior, the Graco 312414D delivers unmatched performance and convenience for all your painting needs.