Graco 312414D Setup, Connect Air and Fluid Lines, Ground the Gun, Flush Before Using Equipment

Page 7

Setup

Setup

At least one hose must provide a static ground to the gun.

Connect Air and Fluid Lines

1.Shut off the air supply.

2.Install a shutoff valve (not supplied) down- stream of the air regulator to shut off gun air.

3.Install an inline air filter (not supplied) to clean and dry the gun air supply.

4.Connect a clean, dry, filtered air supply to the air inlet fitting. See FIG. 1.

• Recommended 5/16 in. (7.9 mm) ID hose, optional 3/8 in. (9.5 mm) ID hose.

Check that your shop air provides ade- quate air flow. See Technical Data, page 23, for minimum cfm requirements.

Set shop air pressure regulator (not supplied) according to fluid manufac- turer’s recommendation. See maximum compliant air pressure on air cap.

Make sure no air restrictions, such as low-volume cheater valves, obstruct the air flow.

5.Connect a fluid hose to the fluid inlet fitting. See FIG. 1.

 

air inlet

fluid inlet

 

 

FIG. 1

 

ti11094a

 

 

 

6.Connect other end of the fluid hose to a regulated fluid supply line.

Ground the Gun

Check your local electrical code and pump manual for detailed grounding instructions.

Ground the spray gun through connection to a Graco-approved grounded fluid or air supply hose.

Flush Before Using Equipment

The equipment was tested with lightweight oil, which is left in the fluid passages to protect parts. To avoid contaminating your fluid with oil, flush the equipment with a compatible sol- vent before using the equipment. See Flush, page 10.

312414D

7

Image 7
Contents Instructions-Parts Important Safety InstructionsContents General Metal Spray Guns ModelsGeneral Metal with Stainless Steel Tip AutomotiveAdhesives StainWaterborne High WearFire and Explosion Hazard Compliant Guns Gun SelectionConventional Guns Hvlp GunsGround the Gun SetupFlush Before Using Equipment Connect Air and Fluid LinesAdjust Spray Pattern Volatile Organic Compounds VOC Regulation Pressure Relief ProcedureOperation Apply FluidFlush Daily Gun MaintenanceSee Compliant Cleaning Methods General TasksCompliant Cleaning Methods Clean GunWrong TroubleshootingProblem Cause Solution RightProblem Cause Solution Follow Pressure Relief Procedure, DisassemblyRepair Reassembly Parts Needle Part DescriptionParts Accessories General Metal Spray Guns Repair KitsGeneral Metal with Stainless Steel Tip Stain AutomotiveHigh Wear AdhesivesSpatter WaterborneSpray Type Application Psi MPa, bar Scfm Technical DataAir Consumption Air Inlet PressureGraco Information Graco Standard WarrantyGraco Headquarters Minneapolis

312414D specifications

The Graco 312414D is a top-tier airless paint sprayer designed specifically for both DIY enthusiasts and professional painters. This versatile sprayer stands out for its efficiency, ease of use, and innovative technologies that make it a valuable tool for any painting job.

One of the main features of the Graco 312414D is its ability to handle a variety of coatings, including paints, stains, and sealers. This makes it ideal for a range of applications, from small indoor projects to larger exterior jobs. With its powerful motor, it can deliver a consistent spray pattern, allowing for a smooth and even application, reducing the risk of overspray and ensuring that surfaces receive a flawless finish.

The unit is equipped with Graco's advanced ProConnect technology, which allows users to easily change out the pump in just a few minutes. This feature minimizes downtime, enabling painters to complete their tasks more efficiently. Additionally, the Graco 312414D features a durable and robust construction, which ensures long-lasting performance, even under heavy use.

Another significant characteristic of the Graco 312414D is its adjustable pressure control, which provides users with the flexibility to customize the spray to suit different materials and surfaces. This feature allows for finer control and reduces waste, making projects more cost-effective. The gun's ergonomic design ensures comfortable handling and reduces fatigue, allowing users to work for extended periods without discomfort.

The sprayer also includes a tip guard and a reversible tip for quick unclogging, which increases usability and minimizes interruptions during painting. Graco’s FlexLiner bag system allows for easy cleanup and helps reduce material waste, making it an eco-friendly choice for painters.

In summary, the Graco 312414D airless paint sprayer is a reliable and efficient tool that offers advanced features and technologies tailored for a variety of painting applications. Its durability, ease of use, and adjustable settings make it a top choice for both professionals and home decorators alike, ensuring exceptional results every time. Whether you're tackling a small room or an entire exterior, the Graco 312414D delivers unmatched performance and convenience for all your painting needs.