Graco 310692D important safety instructions Accessories

Page 30

Accessories

Cleaning Brush 105749

For use in cleaning gun

Lubricant 111265

One 4 oz. (113 gram) tube sanitary (non-silicone) lubri- cant for fluid seals and wear areas.

Air Control Valve Kit 243670

Install on the gun air inlet to control both the atomizing air and the pressure in the spray gun cup (if used).

1/4 npsm x 1/4-19 BSPT.

Accessories

Air Control Valve 234784

Comes with gauge. Allows for air pressure adjust- ment at gun inlet.

HVLP Air Pressure Verification Kit

For use in checking HVLP air cap atomizing air pressure at various supply air pressures. Not to be used for actual spraying.

Install the kit air cap on the gun. Turn on the air to the gun, then trigger the gun and read the atomizing air pressure on the gauge.

30

310692D

Image 30
Contents Delta Spray XT Gun Contents Related ManualsManual Conventions Fire and Explosion Hazard FE CED/IND General Pressurized Equipment HazardPressure feed spray guns with 1 quart pressure feed cup Selection ChartsPressure feed spray guns Siphon feed spray gunsGravity feed spray guns with 3M PPS gravity cup Gravity feed spray guns without gravity cupGravity feed spray guns with 16 oz. gravity cup Orifice sizeHvlp Guns Gun SelectionAir Caps Compliant GunsNozzle, Needle, and Tip Selection Nozzle Orifice FluidNozzle Assy Tip Kit Uses Installation Top and bottom feed gunsKey Setup Connecting the air lineFlushing the gun Positioning the Air Cap Connecting the fluid hoseConnecting the fluid supply Pressure feed guns onlyAdjusting the Spray Pattern WariningSetup Applying the Fluid Pressure Relief ProcedureOperation IncorrectDaily Gun Maintenance General maintenanceFlushing and cleaning Gravity and Siphon Feed GunsPressure Feed Guns Install the air cap retaining ring assembly 15 and air cap Ti4848a Troubleshooting Service Replacing the air and fluid packingsDisassembling the gun Replacing the spray housing o-rings and packings Replacing the pattern adjustment valve packings Replacing the fluid valve packings Reassembling the gun Ti4849i Service 310692D Parts Airspray, HVLP, and Compliant GunsSpray Housing Gun AssemblyPart No. Description Qty Spatter or Specking Airspray Gun Spatter or Specking Airspray Gun Accessories Gravity Cup Holder Bracket Gun Air Regulator AssyGravity Cup SST Pressure Cup Kit 239802 with single air regulatorDisposable Polythylene Cup Liners SST Pressure Cup Kit 239803 with double air regulator3M PPS Paint Preparation System Fluid Shut Off SpringTechnical Data CategoryData Graco Standard Warranty Graco Information