Graco 310692D important safety instructions Installation, Top and bottom feed guns, Key

Page 8

Installation

Installation

Top and bottom feed guns

GEA

D

HC

F

B*

ti4819

FIG. 1

Key:

A Delta Spray XT Gun

E

Air Shutoff Valve

B Fluid Inlet, 3/8 npsm (R3/8-19)*

F

Air Regulator

C

Air Inlet

G

Air Filter

D

Air Hose

H

Air Supply Line

 

recommended 5/16 in. (7.9 mm) ID hose

*Pressure and siphon feed guns will have bottom feed

 

optional 3/8 in. (9.5 mm) ID hose

insert. Gravity feed guns will have a top feed insert.

8

310692D

Image 8
Contents Delta Spray XT Gun Manual Conventions ContentsRelated Manuals Fire and Explosion Hazard FE CED/IND General Pressurized Equipment HazardSelection Charts Pressure feed spray gunsPressure feed spray guns with 1 quart pressure feed cup Siphon feed spray gunsGravity feed spray guns without gravity cup Gravity feed spray guns with 16 oz. gravity cupGravity feed spray guns with 3M PPS gravity cup Orifice sizeGun Selection Air CapsHvlp Guns Compliant GunsNozzle Assy Tip Kit Uses Nozzle, Needle, and Tip SelectionNozzle Orifice Fluid Key InstallationTop and bottom feed guns Flushing the gun SetupConnecting the air line Connecting the fluid hose Connecting the fluid supplyPositioning the Air Cap Pressure feed guns onlyAdjusting the Spray Pattern WariningSetup Pressure Relief Procedure OperationApplying the Fluid IncorrectDaily Gun Maintenance General maintenancePressure Feed Guns Flushing and cleaningGravity and Siphon Feed Guns Install the air cap retaining ring assembly 15 and air cap Ti4848a Troubleshooting Disassembling the gun ServiceReplacing the air and fluid packings Replacing the spray housing o-rings and packings Replacing the pattern adjustment valve packings Replacing the fluid valve packings Reassembling the gun Ti4849i Service 310692D Parts Airspray, HVLP, and Compliant GunsPart No. Description Qty Spray HousingGun Assembly Spatter or Specking Airspray Gun Spatter or Specking Airspray Gun Accessories Gun Air Regulator Assy Gravity CupGravity Cup Holder Bracket SST Pressure Cup Kit 239802 with single air regulatorSST Pressure Cup Kit 239803 with double air regulator 3M PPS Paint Preparation SystemDisposable Polythylene Cup Liners Fluid Shut Off SpringData Technical DataCategory Graco Standard Warranty Graco Information