Removing Handle
Fixed Mounting (optional)
To prevent damaging the unit when transporting it in a truck or on a trailer, Graco recommends fixed mounting to the vehicle.
Removing Handle
3.Remove frame tube plugs (120) located behind the wheels.
120
Repositioning Handle
Before you can secure the unit to a truck or trailer bed, you must reposition the handle.
1. Remove the 4 handle sleeve screws (143).
143
4.Insert plugs (120) in upper frame handle tubes (a).
(a)
120
5. Insert handle assembly (25) into lower frame tubes
(b). The hose bracket should face down. Adjust to appropriate in/out location.
2.Remove handle assembly (25) by pulling it out of upper frame tubes (1).
(b)
2525
25
1
(b)
6. Install sleeve screws (143) in lower frame tubes.
143
311283D | 31 |