Graco Inc 309292S, ti1600a, ti1248a Grounding, Fire, Explosion, and Electric Shock Hazard

Page 12

Installation

Grounding

WARNING

Fire, Explosion, and Electric Shock Hazard

When operating the electrostatic gun, any ungrounded objects in the spray area (peo- ple, containers, tools, etc.) can become electrically charged. Improper grounding can result in static sparking, which can cause a fire, explosion, or electric shock. Follow the grounding instructions below.

The following are minimum grounding requirements for a basic electrostatic system. Your system may include other equipment or objects which must be grounded.

Check your local electrical code for detailed grounding instructions. Your system must be connected to a true earth ground.

•Pump: ground the pump by connecting a ground wire and clamp as described in your separate pump instruction manual.

•All persons entering the spray area: shoes must have conductive soles, such as leather, or personal grounding straps must be worn. Do not wear shoes with non-conductive soles such as rubber or plastic. If gloves are necessary, wear the conductive gloves that are supplied with the gun. If non-Graco gloves are worn, cut off fingers or palm area of gloves to ensure your hand contacts the grounded gun han- dle.

•Object being sprayed: keep the workpiece hangers clean and grounded at all times. Resistance must not exceed 1 megohm.

•The floor of the spray area: must be electrically con- ductive and grounded. Do not cover the floor with cardboard or any non-conductive material which would interrupt grounding continuity.

•Electrostatic Air Spray Gun: ground the gun by con- necting the Graco Grounded Air Hose and connect- ing the air hose ground wire to a true earth ground. See Check Electrical Grounding, page 13.

ti1259a

•Air compressors: ground the equipment according to the manufacturer's recommendations.

•All air and fluid lines must be properly grounded. Use only grounded hoses with a maximum of 100 feet (30.5 m) combined hose length to ensure grounding continuity.

•Flammable liquids in the spray area: must be kept in approved, grounded containers. Do not use plastic containers. Do not store more than the quantity needed for one shift.

•All electrically conductive objects or devices in the spray area: including fluid containers and wash cans, must be properly grounded.

12

309292S

Page 11 Page 13
Image 12
Page 11 Page 13
Contents II 2 G EEx 0.24 mJ List of ModelsTable of Contents List of Models Fire, Explosion, and Electric Shock Hazard Toxic Fluid HazardEquipment Misuse Hazard Pressurized Equipment HazardIntroduction How the Electrostatic Air Spray Gun WorksGun Overview Installation Install the SystemVentilate the Spray Booth Flammable or Toxic Vapor HazardTypical Installation Key Connect the Air Line Connect the Exhaust TubeConnect the Fluid Line Filter the FluidSelect a Fluid Nozzle and Air Cap HC Conversion KitOrifice Size 244919 Conversion Kit Grounding Check Electrical Grounding Check Gun GroundingCheck Fluid Resistivity Check Fluid ViscosityLow Voltage Adjustment Smart Guns Only OperationKV Guns Maintenance Flush the Spray GunHang the gun from its hook, with the nozzle pointing down Electrical Tests Test Gun ResistanceTest Power Supply Resistance Test Power Supply ResistanceTest Electrode Resistance Test Electrode ResistanceTroubleshooting Spray Pattern TroubleshootingGun Operation Troubleshooting Electrical Troubleshooting See Test Gun Resistance onSee Check Fluid Resistivity on Pressure Relief Procedure RepairPrepare the Gun for Service Air Cap/Nozzle Replacement Electrode Replacement Electrode ReplacementFluid Packing Removal Fluid Packing RemovalPacking Rod Repair Packing RodBarrel Removal Barrel Installation Barrel RemovalPower Supply Removal and Replacement Power SupplyTurbine Alternator Removal and Replacement Fluid Tube Removal Replacement PRO Xs4 Guns OnlyFan Air Adjustment Valve Repair Fan Air Adjustment ValveFluid Adjustment Valve Repair Air Valve RepairAtomizing Air Restrictor Valve Removal and Replacement ES ON/OFF Valve RepairParts Ref. No Alternator Ref. No Fan Adjustment Valve Ref. No Packing Rod Ref. No ES ON/OFF ValveFluid Tube Model Part No. Description Qty Part No. Description Qty 51 Ref Ref. No ES ON/OFF Valve Ref. No Packing Rod 26c 178409 SPREADER, packing Uhmwpe SWITCH, ES HI/LO Accessories Air Line AccessoriesFluid Line Accessories Gun Accessories Miscellaneous AccessoriesTechnical Data Category DataTechnical Data 309292S Graco Standard Warranty Graco InformationToll Free

ti1600a, 309292S, ti1248a specifications

Graco Inc, a leading manufacturer in the fluid handling sector, is renowned for its innovative solutions designed for various applications, including protective coatings, sealants, and adhesives. Among their extensive range of products, the TI1248A, 309292S, and TI1600A stand out due to their performance, reliability, and advanced technologies.

Starting with the TI1248A, this sprayer is engineered to provide high efficiency and precise application. It is designed primarily for high-volume projects, making it ideal for professionals who need a robust solution without compromising on quality. The TI1248A features a powerful motor that delivers consistent pressure, allowing users to achieve a smooth and even coating. Additionally, its adjustable pressure settings enable users to customize spray patterns to suit various surfaces and materials.

Next, the 309292S model is particularly notable for its versatility. This sprayer can easily handle a wide array of materials, from heavy coatings to lighter finishes. Its user-friendly design ensures that even those with limited experience can achieve professional results. One of its key features is the Airless Technology, which aids in minimizing overspray and improving transfer efficiency. Consequently, it conserves materials and allows for a more environmentally friendly operation. Furthermore, the 309292S has a compact design, making it easy to maneuver in tight spaces, and its lightweight construction enhances portability.

Finally, the TI1600A completes this trio with its focus on high performance in demanding applications. This model incorporates advanced pressure control technology that provides exceptional consistency during operation. It is specifically engineered for medium to heavy-duty tasks, and its durable construction ensures longevity even under rigorous use. The TI1600A is equipped with an intuitive control panel that simplifies operation, enabling quick adjustments on the fly.

In summary, Graco Inc's TI1248A, 309292S, and TI1600A are exemplary models that highlight the company's commitment to quality and technology. Each model comes with unique features tailored for specific applications, ensuring that users can find a sprayer that meets their needs effectively. With a reputation built on reliability and innovation, Graco continues to lead the industry, providing tools that enhance productivity and deliver superior results.
Top Page Image Contents