Graco Inc ti1600a, 309292S Select a Fluid Nozzle and Air Cap, HC Conversion Kit, Orifice Size

Page 10

Installation

Select a Fluid Nozzle and Air Cap

The gun is supplied with Part No. 197266 Nozzle and 24A376 Air Cap. If you require a different size, refer to Table 1 and Table 2 , and instruction manual 309419, or consult with your Graco distributor. See Air Cap/Nozzle Replacement on page 26.

A wide pattern kit (P/N 24A431) is included with the gun and if installed, will provide more fan air for wider spray patterns. (If pattern becomes split, use the fan air valve to reduce the amount of fan air.)

WARNING

Pressurized Equipment Hazard

To reduce the risk of an injury, follow the Pressure Relief Procedure on page 24 before removing or installing a fluid nozzle and/or air cap.

 

Table 1: Fluid Nozzles

 

 

 

Part No.

 

Orifice Size

 

 

 

197263

 

0.75 mm (.030 in.)

 

 

 

197264

 

1.0 mm (.042 in.)

 

 

 

197265

 

1.2 mm (.047 in.)

 

 

 

197266

 

1.5 mm (.055 in.)

 

 

 

197267

 

1.8 mm (.070 in.)

 

 

 

197268†

 

2.0 mm (.080 in.)

 

 

 

249920*

 

0.75 mm (.030 in.)

 

 

 

249921*

 

1.0 mm (.042 in.)

 

 

 

249922*

 

1.2 mm (.047 in.)

 

 

 

249923*

 

1.5 mm (.055 in.)

 

 

 

249924*

 

1.8 mm (.070 in.)

 

 

 

249925*†

 

2.0 mm (.080 in.)

 

 

 

* Glass-reinforced acetal construction.j

†Air cap 24A439 must be used with a 2.0 mm (0.080 in.) nozzle.

Table 2: Air Caps

 

Pattern Shape

Recommended Fluids and

Part No.

and Length in.

Production Rates

 

(mm)

 

 

 

 

 

24A438

Round end;

Light to medium viscosity.

15-17 (381-432)

Up to 15 oz/min (450 cc/min)

 

 

 

 

Round end;

Medium to high viscosity and

24A279

high solids.

14-16 (356-406)

 

 

Up to 15 oz/min (450 cc/min)

 

 

 

24A376*

Tapered end;

Light to medium viscosity.

17-19 (432-483)

Up to 15 oz/min (450 cc/min)

 

 

 

24A274

Tapered end;

Light to medium viscosity.

12-14 (305-356)

Up to 15 oz/min (450 cc/min)

 

 

 

 

 

Medium to high viscosity and

24A439

Round end;

high solids.

11-13 (279-330)

Up to 15 oz/min (450 cc/min)

 

 

For use with 2.0 mm nozzle.

 

 

 

 

 

Light to medium viscosity and

24A275

Tapered end;

high solids.

14-16 (356-406)

Aerospace coatings.

 

 

Up to 25 oz/min (750 cc/min).

 

 

 

*Also available in the following colors: 24A276 - blue

24A277 - red

24A278 - green

244919 HC Conversion Kit

Part No. 244919 Conversion Kit converts PRO Xs3 stan- dard coating guns (Part Nos. 244400 and 244579) to high conductivity guns (244575 and 244576). For further instruction and parts, see manual 309453.

The kit is for use with fluids with low resistivity values.

WARNING

Pressurized Equipment Hazard

To reduce the risk of an injury, follow the Pressure Relief Procedure in your gun manual before installing this kit.

1.Turn the ES ON/OFF valve OFF.

2.Flush and relieve the pressure.

3.Disconnect the fluid and air lines to the gun.

10

309292S

Page 9 Page 11
Image 10
Page 9 Page 11
Contents II 2 G EEx 0.24 mJ List of ModelsTable of Contents List of Models Fire, Explosion, and Electric Shock Hazard Toxic Fluid HazardEquipment Misuse Hazard Pressurized Equipment HazardHow the Electrostatic Air Spray Gun Works IntroductionGun Overview Ventilate the Spray Booth InstallationInstall the System Flammable or Toxic Vapor HazardTypical Installation Key Connect the Fluid Line Connect the Air LineConnect the Exhaust Tube Filter the FluidHC Conversion Kit Select a Fluid Nozzle and Air CapOrifice Size 244919 Conversion Kit Grounding Check Electrical Grounding Check Gun GroundingCheck Fluid Resistivity Check Fluid ViscosityOperation Low Voltage Adjustment Smart Guns OnlyKV Guns Maintenance Flush the Spray GunHang the gun from its hook, with the nozzle pointing down Electrical Tests Test Gun ResistanceTest Power Supply Resistance Test Power Supply ResistanceTest Electrode Resistance Test Electrode ResistanceTroubleshooting Spray Pattern TroubleshootingGun Operation Troubleshooting See Test Gun Resistance on Electrical TroubleshootingSee Check Fluid Resistivity on Pressure Relief Procedure RepairPrepare the Gun for Service Air Cap/Nozzle Replacement Electrode Replacement Electrode ReplacementFluid Packing Removal Fluid Packing RemovalPacking Rod Repair Packing RodBarrel Removal Barrel Installation Barrel RemovalPower Supply Removal and Replacement Power SupplyTurbine Alternator Removal and Replacement Fluid Tube Removal Replacement PRO Xs4 Guns OnlyFan Air Adjustment Valve Repair Fan Air Adjustment ValveFluid Adjustment Valve Repair Air Valve RepairAtomizing Air Restrictor Valve Removal and Replacement ES ON/OFF Valve RepairParts Ref. No Packing Rod Ref. No ES ON/OFF Valve Ref. No Alternator Ref. No Fan Adjustment ValveFluid Tube Model Part No. Description Qty Part No. Description Qty 51 Ref Ref. No ES ON/OFF Valve Ref. No Packing Rod 26c 178409 SPREADER, packing Uhmwpe SWITCH, ES HI/LO Air Line Accessories AccessoriesFluid Line Accessories Gun Accessories Miscellaneous AccessoriesTechnical Data Category DataTechnical Data 309292S Graco Information Graco Standard WarrantyToll Free

ti1600a, 309292S, ti1248a specifications

Graco Inc, a leading manufacturer in the fluid handling sector, is renowned for its innovative solutions designed for various applications, including protective coatings, sealants, and adhesives. Among their extensive range of products, the TI1248A, 309292S, and TI1600A stand out due to their performance, reliability, and advanced technologies.

Starting with the TI1248A, this sprayer is engineered to provide high efficiency and precise application. It is designed primarily for high-volume projects, making it ideal for professionals who need a robust solution without compromising on quality. The TI1248A features a powerful motor that delivers consistent pressure, allowing users to achieve a smooth and even coating. Additionally, its adjustable pressure settings enable users to customize spray patterns to suit various surfaces and materials.

Next, the 309292S model is particularly notable for its versatility. This sprayer can easily handle a wide array of materials, from heavy coatings to lighter finishes. Its user-friendly design ensures that even those with limited experience can achieve professional results. One of its key features is the Airless Technology, which aids in minimizing overspray and improving transfer efficiency. Consequently, it conserves materials and allows for a more environmentally friendly operation. Furthermore, the 309292S has a compact design, making it easy to maneuver in tight spaces, and its lightweight construction enhances portability.

Finally, the TI1600A completes this trio with its focus on high performance in demanding applications. This model incorporates advanced pressure control technology that provides exceptional consistency during operation. It is specifically engineered for medium to heavy-duty tasks, and its durable construction ensures longevity even under rigorous use. The TI1600A is equipped with an intuitive control panel that simplifies operation, enabling quick adjustments on the fly.

In summary, Graco Inc's TI1248A, 309292S, and TI1600A are exemplary models that highlight the company's commitment to quality and technology. Each model comes with unique features tailored for specific applications, ensuring that users can find a sprayer that meets their needs effectively. With a reputation built on reliability and innovation, Graco continues to lead the industry, providing tools that enhance productivity and deliver superior results.
Top Page Image Contents