Graco Inc 308870 dimensions Working Pressure

Page 2

Warnings and Cautions

Warning Symbol

WARNING

This symbol alerts you to the possibility of serious injury or death if you do not follow the instructions.

Caution Symbol

CAUTION

This symbol alerts you to the possibility of damage to or destruction of equipment if you do not follow the instructions.

WARNING

Fire and explosion can occur when spraying or flushing flammable fluid in an area where air circulation is poor and flammable vapors can be ignited by an open flame or sparks.

To help prevent a fire and explosion:

DUse outdoors or in an extremely well ventilated area.

DDo not use 1,1,1–trichloroethane, methylene chloride, other halogenated hydrocarbon solvents or fluids containing such solvents in pressurized aluminum equipment. Such use could result in a chemical reaction, with the possibility of explosion.

DRemove, extinguish or unplug all ignition sources; tape wall switch. Do not smoke in spray area.

DNever fill fuel tank while the engine is running or hot.

DGround Sprayer, object being sprayed, paint and solvent pails.

DHold gun firmly to side of a grounded pail when triggering into pail. DUse only conductive airless paint hose.

DNever run engine in inclosed area.

Fluid injection is a serious injury! If high pressure fluid pierces your skin, the injury might look like “just a cut”. But it is a serious wound! Get immediate medical attention.

To help prevent injection, always:

DEngage trigger safety latch when not spraying. DPoint gun away from yourself or anyone else. DRelieve pressure before checking or repairing any leak.

DRelieve pressure when you turn off the sprayer or stop spraying. DDo not use components rated less than system Maximum

Working Pressure

Never allow children to use this unit. If you are injured using this equipment, get immediate medical treatment.

￿￿0￿￿￿0

Image 2
Contents Table of Contents 308870Working Pressure Component Identification and Function Maintenance Pressure Relief ProcedureTroubleshooting CauseReplace packings. Manual Replace rod. Manual Drive Housing RollersCam Follower Bearings Pinion Assembly/Rotor/Field/Shaft/Clutch Remove five screws 26 and lockwashers 17 and pinion assemblyClamp Clutch Housing EngineOn/Off Switch Control Board Pressure Adjust PotentiometerPressure Control Pressure Control TransducerControl Board Diagnostics Indicates What to doRemoval Displacement PumpInstallation RepairPump Pin Clip Remove clipParts List & Drawing Pinion Assembly Ref NoParts Drawing Hi-Boy Sprayers ModelParts List Hi-Boy Sprayers Parts Drawing Lo-Boy Sprayers Parts List Lo-Boy Sprayers Parts Drawing Sprayer Models 232630 throughParts List Sprayer Models 232630 throughModels 232631 Parts List & Drawing Complete SprayersAccessories Graco Phone Number Technical DataDimensions Graco Warranty For Graco Canada Customers