Graco Inc 236-870, 308-230, 236-628, 236-868, 236-414, 236-869, 236-412, 224-833 Toxic Fluid Hazard

Page 3

WARNING

TOXIC FLUID HAZARD

Hazardous fluid or toxic fumes can cause serious injury or death if splashed in the eyes or on the skin, inhaled, or swallowed.

DKnow the specific hazards of the fluid you are using.

DStore hazardous fluid in an approved container. Dispose of hazardous fluid according to all local, state and national guidelines.

DAlways wear protective eyewear, gloves, clothing and respirator as recommended by the fluid and solvent manufacturer.

DPipe and dispose of the exhaust air safely, away from people, animals, and food handling areas. If the diaphragm fails, the fluid is exhausted along with the air. See Air Exhaust Ventilation in the separate pump manual 308–553.

FIRE AND EXPLOSION HAZARD

Improper grounding, poor ventilation, open flames or sparks can cause a hazardous condition and result in a fire or explosion and serious injury.

DGround the equipment. Refer to Grounding on page 9.

DIf there is any static sparking or you feel an electric shock while using this equipment, stop pumping immediately. Do not use the equipment until you identify and correct the problem.

DProvide fresh air ventilation to avoid the buildup of flammable fumes from solvents or the fluid being pumped.

DPipe and dispose of the exhaust air safely, away from all sources of ignition. If the diaphragm fails, the fluid is exhausted along with the air. See Air Exhaust Ventilation in the separate pump manual 308–553.

DKeep the work area free of debris, including solvent, rags, and gasoline.

DElectrically disconnect all equipment in the work area.

DExtinguish all open flames or pilot lights in the work area.

DDo not smoke in the work area.

DDo not turn on or off any light switch in the work area while operating or if fumes are present.

DDo not operate a gasoline engine in the work area.

 

Image 3
Contents 308-230 Symbols Table of ContentsToxic Fluid Hazard Assembling Pail Mount Units InstallationAssembling the Wall Mount Unit Accessories General InformationHose Connections KEY Air Spray Typical Installation Grounding Flush the Pump Before First Use Pressure Relief ProcedureStarting and Adjusting the Pump OperationSurge Tank Models 236-628, 236-869, 236-412, 236-868, Pump ShutdownFlushing and Storage Recirculation LineIncludes items Parts13a Part of item 17a 17b 34 Ref Includes items 1-35 Ref. No , Hose Kit Includes Items Includes items 1-26 13a Wall Mounting Hole Layout DimensionsManual Change Summary Technical DataGraco Phone Number Graco Warranty and Disclaimers