Graco Inc 235-463, 308-236, 237-695, 236-531, 238-966 Fire and Explosion Hazard, Toxic Fluid Hazard

Page 4

WARNING

FIRE AND EXPLOSION HAZARD

Improper grounding, poor ventilation, open flames or sparks can cause a hazardous condition and result in a fire or explosion and serious injury.

DIf there is any static sparking or you feel an electric shock while using this equipment, stop spray- ing immediately. Do not use the equipment until you identify and correct the problem.

DProvide fresh air ventilation to avoid the buildup of flammable fumes from solvents or the fluid being sprayed.

DKeep the spray area free of debris, including solvent, rags, and gasoline.

DElectrically disconnect all equipment in the spray area.

DExtinguish all open flames or pilot lights in the spray area.

DDo not smoke in the spray area.

DDo not turn on or off any light switch in the spray area while operating or if fumes are present.

DDo not operate a gasoline engine in the spray area.

DGround the equipment and the object being sprayed. Refer to your pump instruction manual.

TOXIC FLUID HAZARD

Hazardous fluid or toxic fumes can cause serious injury or death if splashed in the eyes or on the skin, inhaled, or swallowed.

DKnow the specific hazards of the fluid you are using.

DStore hazardous fluid in an approved container. Dispose of hazardous fluid according to all local, state and national guidelines.

DAlways wear protective eyewear, gloves, clothing and respirator as recommended by the fluid and solvent manufacturer.

4￿￿8￿￿￿6

Image 4
Contents 308±236 Table of Contents SymbolsMoving Parts Hazard Injection HazardRecoil Hazard Fire and Explosion Hazard Toxic Fluid HazardInstallation/Operation Pressure Relief ProcedureHow to Use the Gun Trigger Safety System RequirementsHow to Adjust the Spray Pattern How to Use the GunWill cause premature tip wear and pump wear How to Clean the Spray Tip Clear a Spray Tip Obstruction Cleaning During the DayRelieve the pressure Clearing an ObstructionHow to Flush the Gun How to Check the Gun Diffuser OperationFire and Explosion Hazard Service Needle Replacement38236 Description Qty PartsModel 235±461, Series B Following information applies to all parts lists Model 235±462, Series CModel 235±463, Series D DescriptionAccessories FiltersSwivels and Whip Hoses ToolsManual Change Summary Technical DataCategory Data 38236 Graco Warranty Additional Warranty CoverageGraco Phone Number Limitation of Liability