Graco Inc 03695A, 307741, 237000, 235525, 220106 manual Fire and Explosion Hazard

Page 4

WARNING

FIRE AND EXPLOSION HAZARD

Improper grounding, poor ventilation, open flames or sparks can cause a hazardous condition and result in a fire or explosion and serious injury.

DGround the equipment and the object being sprayed. Refer to Grounding on page 5.

DIf there is any static sparking or you feel an electric shock while using this equipment, stop spray- ing/dispensing immediately. Do not use the equipment until you identify and correct the problem.

DProvide fresh air ventilation to avoid the buildup of flammable fumes from solvents or the fluid being sprayed/dispensed.

DKeep the spray/dispense area free of debris, including solvent, rags, and gasoline.

DElectrically disconnect all equipment in the spray/dispense area.

DExtinguish all open flames or pilot lights in the spray/dispense area.

DDo not smoke in the spray/dispense area.

DDo not turn on or off any light switch in the spray/dispense area while operating or if fumes are present.

DDo not operate a gasoline engine in the spray/dispense area.

TOXIC FLUID HAZARD

Hazardous fluid or toxic fumes can cause serious injury or death if splashed in the eyes or on the skin, inhaled, or swallowed.

DKnow the specific hazards of the fluid you are using.

DStore hazardous fluid in an approved container. Dispose of hazardous fluid according to all local, state and national guidelines.

DAlways wear protective eyewear, gloves, clothing and respirator as recommended by the fluid and solvent manufacturer.

4307741

Image 4
Contents 307741 Part No , Series aPart No , Series B This manual contains important warnings and informationTable of Contents SymbolsInjection Hazard Fire and Explosion Hazard Installation General Information GroundingNoise Reduction Air Motor IcingTroubleshooting Pressure Relief ProcedureAlways follow the Pressure Relief Procedure whenever you Stalled MotorCheck Chart Air Leaks45, *46 Disassembly ServiceTools Required To prevent the spring-loaded director valves Service 07283A 07421A 03701 Reassembly 39 2 02963 Lubricate the housing 18, spring 17, and guide Parts Model 220106, Series aDescription Qty Trip ROD AssyModel 235525, Series B 26n 166221 Ring nitrile rubber Model 237000, Series a Muffler Dimensions ModelManual Change Summary Technical DataCategory Data Page 307741 Graco Phone Number Graco Standard WarrantyToll Free