Graco Inc 03289A Assembling the Sprayer, Cart Mounted Pump, Wall Mount Pump, Pail Mounted Pump

Page 4

Assembling the Sprayer

Cart Mounted Pump

Assemble the suction hose (6) to the elbow (5) at the pump intake. Screw the suction tube (7) onto the other end of the hose. See Fig. 1.

4.Screw the elbow (22) into the pump air inlet, so the female threads face down. Apply sealant to both ends of the hose (23). Connect one end to the elbow (22), then connect the other end to the swivel (24) at the pump air regulator (F).

5.Unscrew the filter bowl (T) from the top cap (U). Apply sealant to the threads of the nipple (14) and install the nipple and top cap in the pump outlet. Lubricate the threads of the filter bowl (T) and screw it into the top cap (U) tightly.

6.Mount the wall bracket 5 ft (1.5 m) above the floor. Be sure the wall is strong enough to support the weight of the pump and accessories, fluid, hoses, and stress caused during pump operation. Refer to manual 306±783 for further information.

7.Screw the suction kit swivel (13) onto the pump intake.

1 Apply thread sealant.

7

5

6

G 25

7

29

 

 

S F 25

 

14

36

1

 

34

 

30

 

 

24

 

U

 

T

22

1

23

1

13

Fig. 1

￿￿￿56

Wall Mount Pump

1.Screw the gauges (25) into the air regulators (F, G). See Fig. 2.

2.Connect the nipple (34) and bleed valve (30) to the swivel (36).

3.Install the air manifold assembly (S) to the wall bracket (7) using the two screws (29).

￿￿￿57

Fig. 2

Pail Mounted Pump

The pail mounted pump is shipped completely as- sembled.

4308±367

Image 4
Contents 308±367 Part No ±721Part No ±722 Part No ±723Table of Contents SymbolsMPa, 8.4 bar incoming air pressure 308±367Assembling the Sprayer Cart Mounted PumpWall Mount Pump Pail Mounted PumpInstallation System AccessoriesMust be open when you close this valve GroundingTypical Installation ± Cart Mount Model Shown Hose and Gun ConnectionsFlush the Pump Before Using Pressure Relief ProcedureOperation Starting and Adjusting the Pump Shutdown and CarePail Mounted Pumps Part No ±721 Cart Mounted Pump Parts10 308±367 Description Qty Part No ±722 Pail Mounted Pump 12 308±367Adapter Part No ±723 Wall Mount Pump 14 308±367Manual Change Summary Technical DataCategory Data Graco Warranty Graco Phone Number±800±367±4023 Toll Free 16 308±367