Installation, Accessories, Technical Data

INSTALLATION

PARTS LIST

Follow the Pressure Relief Procedure on the first page.

See the drawing below for assembling the extension. Before installing the spray tip, start and prime the sprayer.

Install the tip in the tip guard and be sure to install the tip gasket. Screw the tip guard firmly onto the adapter.

NOTE: A Reverse-A-Clean IV DripLess Tip Guard may be used in place of the one supplied with the extension.

Flushing

Follow the flushing guidelines given in your seperate pump instruction manual. Be sure to relieve fluid pres- sure, and then remove the spray tip before flushing. This reduces the risk of static sparking and splashing fluid in the eyes.

TIP NOT INCLUDED

Model 223±390		12 in. (305 mm) long
Model 223±391		18 in. (457 mm) long
Model 223±392		24 in. (610 mm) long
REF
NO. PART NO.		DESCRIPTION	QTY
1	180±137	NUT, gun	1
2	180±136	ADAPTER, tip	1
3	166±969	WASHER, tip	2
4	220±222	TIP GUARD	1
5		EXTENSION TUBE
	218±244	12 in. for Model 223±390	1
	218±245	18 in. for Model 223±391	1
	218±246	24 in. for Model 223±392	1
	3

GUN NOT INCLUDED

ACCESSORIES

Must be purchased separately.

SPRAY GUNS

Includes Reverse±A±Clean IV DripLess Tip Guard and a SwitchTip

ªSILVERº GUN

220±954

5000 psi (350 bar) Max. Working Pressure SwitchTipis size 517.

ªCONTRACTORº GUN 220±955

3600 psi (248 bar) Max. Working Pressure SwitchTipis size 517.

ªBLACK MAXº GUN

220±730

3600 psi (248 bar) Max. Working Pressure

SwitchTipis size 513.

REVERSE-A-CLEANIV DripLess Tip Guard 220±422

Uses fluid pressure to remove tip clogs. Purchase SwitchTip separately.

ADAPTER GUN NUTS for other guns

Use in place of 180±137.

180±147 Fits Binks high pressure guns 180±146 Fits Wagner high pressure guns

TECHNICAL DATA

Maximum Working Pressure . . . . . . 4050 psi (280 bar) Wetted Parts . . . . . . . . . . . . . . . . . . . Aluminum, Plastic, Stainless Steel, Plated Steel

Weight223±390 . . . . . . . . . . 6.9 oz (195 g) 223±391 . . . . . . . . . . 8.4 oz (239 g) 223±392 . . . . . . . . . . . 10 oz (283 g)

Factory Branches: Atlanta, Chicago, Dallas, Detroit, Los Angeles, West Caldwell (N.J.)

Subsidiary and Affiliate Companies: Canada; England; Switzerland; France; Germany; Hong Kong; Japan

GRACO INC. P.O. BOX 1441 MINNEAPOLIS, MN 55440±1441

PRINTED IN U.S.A. 308±011 2±90