Graco Inc 308-332, 236-900, 236-898, 236-069, 236-065 manual Installation, Grounding

Page 5

Installation

Grounding

WARNING

FIRE AND EXPLOSION HAZARD Before operating the pump, ground the system as explained below. Also read the section FIRE AND EXPLOSION HAZARD on page 4.

To reduce the risk of static sparking, ground the pump. Check your local electrical code for detailed grounding instructions for your area and type of equipment. Be sure to ground all of this dispensing equipment.

1.Pump: loosen the grounding lug locknut (W) and washer (X). Insert one end of a 1.5 mm2 (12 ga) minimum ground wire (Y) into the slot in lug (Z) and tighten the locknut securely. See Fig. 1. Con- nect the other end of the ground wire to a true earth ground.

2.Air hoses: use only electrically conductive air hoses.

3.Fluid hoses: use only electrically conductive fluid hoses.

4.Air compressor: follow manufacturer's recommen- dations.

5.Spray gun: grounding is obtained through connec- tion to a properly grounded fluid hose and pump.

6.Fluid supply container: according to your local code.

7.Object being sprayed: according to your local code.

8.All solvent pails used when flushing, according to local code. Use only metal pails, which are con- ductive, placed on a grounded surface. Do not place the pail on a non-conductive surface, such as paper or cardboard, which interrupts the grounding continuity.

9.To maintain grounding continuity when flushing or relieving pressure, always hold a metal part of the spray gun firmly to the side of a grounded metal pail, then trigger the spray gun.

X

Y

W

Z

 

￿864

Fig. 1

￿￿8￿￿￿￿ 5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Part No ±065 308±332Part No ±898 Part No ±069MPa, 12.5 bar maximum air inlet pressure Table of ContentsSymbols Injection Hazard Fire and Explosion Hazard Grounding InstallationHose and Gun Connections System AccessoriesWall Mount Pump KEY Typical Installation ± Model 236±067 ShownFlush the Pump Before Using Pressure Relief ProcedureStarting and Adjusting the Pump OperationShutdown and Care Parts Part No ±898 Wall Mount Pump without Fluid Regulator Part No ±065 Wall Mount Pump with Fluid RegulatorPart No ±069 Pail Mounted Pump with Fluid Regulator Includes items 1±28, 33, 40±50 Part No ±900 Pail Mounted Pump without Fluid RegulatorPage Category Data Technical DataManual Change Summary ±800±367±4023 Toll Free Graco WarrantyGraco Phone Number

236-898, 308-332, 236-069, 236-900, 236-065 specifications

Graco Inc. is a leading provider of fluid management solutions, known for its innovative products that cater to various industries. Among its extensive range of offerings, the models 236-065, 236-900, 236-069, 308-332, and 236-898 stand out due to their superior features and advanced technologies.

The Graco 236-065 is notable for its high-performance capabilities. It is designed for efficient transfer and application of coatings and adhesives, ensuring consistent results every time. This model is equipped with an easy-to-use automated system that minimizes operator involvement, thereby increasing productivity. Its robust construction ensures durability, making it suitable for industrial environments.

The Graco 236-900 is another exemplary model, highlighting precision engineering. It integrates Graco’s proprietary ProConnect technology, which allows for quick and convenient maintenance. This model excels in providing controlled flow rates and optimal performance, ideal for varied applications ranging from heavy-duty coatings to intricate detailing work. The built-in safety features enhance operator protection while maintaining high output efficiency.

Model 236-069 is a versatile solution designed for diverse applications. It is particularly known for its lightweight design and portability, allowing for easy transport between job sites. The intuitive control interface of the 236-069 ensures that users can operate the equipment with minimal training, boosting overall job efficiency. Its compatibility with multiple accessories further extends its functionality for different fluid types and viscosities.

Graco 308-332 is engineered for industrial painting applications. Its advanced pump technology delivers consistent material flow, providing superior finish quality even in challenging conditions. This model emphasizes low maintenance with its fail-safe design, ensuring long operational life and reduced downtime.

Finally, the Graco 236-898 is tailored for high-volume applications. It boasts a large capacity, which means less frequent refills and greater productivity. The smart technology incorporated in this model allows for real-time monitoring of various parameters, significantly enhancing operational oversight and efficiency.

All these models exemplify Graco’s commitment to innovation, reliability, and performance. With user-friendly features, advanced technology, and a focus on operational efficiency, Graco Inc. continues to lead the way in fluid management solutions, ensuring their products meet the diverse needs of customers across various industries.
Top Page Image Contents