System Accessories, Wall Mount Pump | Graco Inc 236-900, 308-332

Installation

Be sure that all operators read and understand this entire manual and the separate manuals supplied with components and accessories before using this equip- ment.

Reference numbers and letters in parentheses refer to the figures and the parts lists on pages 10±13.

Accessories mentioned are available from your Graco distributor. If you supply your own accessories, be sure they are adequately sized to meet your system's requirements.

The Typical Installation shown in Fig. 3 is only an example. For assistance in designing a system to meet your particular needs, contact your Graco distributor.

System Accessories

WARNING

Two required components are supplied with your pump, to help reduce the risk of serious injury including fluid injection, splashing in the eyes or on the skin, or injury from moving parts if you are adjusting or repairing the pump.

The bleed-type master air valve (B) relieves air trapped between this valve and the pump. Trapped air can cause the pump to cycle unexpectedly. To bleed air from the pump, the pump air regulator (F) must be open when you close this valve.

The fluid drain valve (H) assists in relieving fluid pressure in the displacement pump, hose, and gun; triggering the gun to relieve pressure may not be sufficient.

Install an air line filter (E) in the main air line, to re- move harmful dirt and moisture from the compressed air supply. To provide automatic lubrication of the air motor, install an air line lubricator (P) downstream from the pump air regulator (F). Install a second master air valve (D) in the main air line, to isolate the accessories for servicing.

Wall Mount Pump

Mount the wall bracket 5 ft (1.5 m) above the floor. Be sure the wall is strong enough to support the weight of the pump and accessories, fluid, hoses, and stress caused during pump operation. See Fig. 2 for a brack- et mounting hole pattern.

5 in. (127 mm)



6.26 in.
(159	Four 0.47
mm)	in. (12 mm)
	diameter
	holes	2824

Fig. 2

Hose and Gun Connections

Refer to Fig. 3. Apply thread sealant and screw the suction hose (J) into the fluid intake elbow (S).

On models with a fluid regulator (R), connect one end of the fluid hose (L) to the fluid regulator outlet. On models without fluid regulators, connect one end of the fluid hose (L) to the outlet of the fluid filter (K). Connect the other end of the fluid hose (L) to the fluid inlet of the spray gun (N). Do not install the spray tip in the gun yet.

Close the bleed-type master air valve (B) and the air regulators (F and G). Connect a grounded air hose (M) between the outlet of the gun air regulator (G) and the air inlet of the spray gun (N). The pump air regulator

(F) is connected to the pump (A) with a hose (C).

236-898, 308-332, 236-069, 236-900, 236-065 specifications

Graco Inc. is a leading provider of fluid management solutions, known for its innovative products that cater to various industries. Among its extensive range of offerings, the models 236-065, 236-900, 236-069, 308-332, and 236-898 stand out due to their superior features and advanced technologies.

The Graco 236-065 is notable for its high-performance capabilities. It is designed for efficient transfer and application of coatings and adhesives, ensuring consistent results every time. This model is equipped with an easy-to-use automated system that minimizes operator involvement, thereby increasing productivity. Its robust construction ensures durability, making it suitable for industrial environments.

The Graco 236-900 is another exemplary model, highlighting precision engineering. It integrates Graco’s proprietary ProConnect technology, which allows for quick and convenient maintenance. This model excels in providing controlled flow rates and optimal performance, ideal for varied applications ranging from heavy-duty coatings to intricate detailing work. The built-in safety features enhance operator protection while maintaining high output efficiency.

Model 236-069 is a versatile solution designed for diverse applications. It is particularly known for its lightweight design and portability, allowing for easy transport between job sites. The intuitive control interface of the 236-069 ensures that users can operate the equipment with minimal training, boosting overall job efficiency. Its compatibility with multiple accessories further extends its functionality for different fluid types and viscosities.

Graco 308-332 is engineered for industrial painting applications. Its advanced pump technology delivers consistent material flow, providing superior finish quality even in challenging conditions. This model emphasizes low maintenance with its fail-safe design, ensuring long operational life and reduced downtime.

Finally, the Graco 236-898 is tailored for high-volume applications. It boasts a large capacity, which means less frequent refills and greater productivity. The smart technology incorporated in this model allows for real-time monitoring of various parameters, significantly enhancing operational oversight and efficiency.

All these models exemplify Graco’s commitment to innovation, reliability, and performance. With user-friendly features, advanced technology, and a focus on operational efficiency, Graco Inc. continues to lead the way in fluid management solutions, ensuring their products meet the diverse needs of customers across various industries.