Graco Inc 231063, 306706W Fire And Explosion Hazard, Toxic Fluid Hazard

Page 5
FIRE AND EXPLOSION HAZARD

TOXIC FLUID HAZARD WARNING

FIRE AND EXPLOSION HAZARD

Improper grounding, poor ventilation, open flames or sparks can cause a hazardous condition and result in a fire or explosion and serious injury.

DGround the equipment and the object being sprayed. Refer to Grounding on page 6.

DIf there is any static sparking or you feel an electric shock while using this equipment, stop spray- ing immediately. Do not use the equipment until you identify and correct the problem.

DProvide fresh air ventilation to avoid the buildup of flammable fumes from solvents or the fluid being sprayed.

DKeep the spray area free of debris, including solvent, rags, and gasoline.

DElectrically disconnect all equipment in the spray area.

DExtinguish all open flames or pilot lights in the spray area.

DDo not smoke in the spray area.

DDo not turn on or off any light switches in the spray area while operating or if fumes are present.

DDo not operate a gasoline engine in the spray area.

TOXIC FLUID HAZARD

Hazardous fluid or toxic fumes can cause serious injury or death if splashed in the eyes or on the skin, inhaled, or swallowed.

DKnow the specific hazards of the fluid you are using.

DStore hazardous fluid in an approved container. Dispose of hazardous fluid according to all local, state and national guidelines.

DAlways wear protective eyewear, gloves, clothing, and respirator as recommended by the fluid and solvent manufacturer.

306706 5

Image 5
Contents Important Safety Instructions Instructions-Parts List301 President R Hydra-Spray R Model 231063, Series CAdjusting the Unit Table of ContentsInstallation Starting and Adjusting the Pump306706 EQUIPMENT MISUSE HAZARDMOVING PARTS HAZARD SKIN INJECTION HAZARDTOXIC FLUID HAZARD FIRE AND EXPLOSION HAZARDSystem Accessories InstallationGrounding Positioning the UnitTo order an air line filter, order by Part No. from the list below Connecting the Unit and Accessorieselevator pumpPressure Relief Procedure Operation/MaintenanceAdjusting the Unit Flushing the PumpShutdown and Care of the Pump Starting and Adjusting the PumpModel 231063, Series C, 301 PresidentR Hydra-SprayR Parts Drawing06218 06218ADescription Parts ListSee 306287 for parts SWIVEL See 306861 for partsPage Technical Data Graco Information Graco Standard WarrantyGRACO INC. P.O. BOX 1441 MINNEAPOLIS, MN FOR GRACO CANADA CUSTOMERS