Technical Specifications & Configurable Options
Everything you need to make an informed decision
Technical Specifications
Dimensions |
|
|
Base Unit (no hoppers) | 39W x 70H x 38D in (99 x 178 x 97 cm) | |
Side mounted hoppers | 99W x 70H x 38D in (252 x 178 x 97 cm) | |
Rear mounted hoppers | 57W x 70H x 65D in (145 x 178 x 165 cm) | |
Mix ratio range | 1:1 to 10:1 (in 0.1 increments) | |
Ratio tolerance range | +/- 5% | |
Fluid filtration | 60 mesh (238 micron standard) | |
|
| (not included on some models) |
Flow rates |
|
|
Minimum | 1 qt/min (0.95 lpm)* | |
Maximum | 3 gpm (11.4 lpm)* | |
|
| *Actual flow rates vary by material type |
Air inlet | 3/4 npt (f) | |
Fluid inlets without feed kits | ||
Max mixed fluid working pressure |
|
|
50:1 | 5200 psi (358 bar, 35.8 MPa) | |
70:1 | 6300 psi (434 bar, 43.4 MPa) | |
Air supply pressure range | ||
Max pump air set pressure |
|
|
50:1 | 100 psi (7.0 bar, 0.7 MPa) | |
70:1 | 90 psi (6.2 bar, 0.62 MPa) | |
Max pump inlet fluid pressure | 250 psi (17 bar, 1.7 MPa) | |
Max air consumption at 100 psi (0.7 MPa, 7.0 bar) | .......... 75 scfm/gpm (0.56 m3/min/lpm) | |
Ambient temperature range
Operating | 32° to 130°F (0° to 54°C) |
Storage | 30° to 160°F |
Weight |
|
Base machine | 1160 lb (526 kg) |
| (No heaters, hoppers or junction box) |
Fully configured | 1550 lb (703 kg) |
| (Includes heated hoppers, feed pumps, heaters and junction box) |
Sound pressure | 86 dBA at 100 psi (7.0 bar, 0.7 MPa) |
Fluid viscosity range | |
(heavier viscosities can be sprayed using heat, recirculation and/or pressure feeding) | |
Wetted parts |
|
Suction tubes | Aluminum |
Flush pump | Stainless steel, aluminum, carbide, |
| UHMWPE and PTFE |
Hoses | Nylon |
Pumps (A and B) | Carbon steel, alloy steel, 303, 440, |
| stainless steel, zinc and nickel plating, ductile iron, |
| tungsten carbide, and PTFE |
Metering valves | Carbon steel, nickel plating, carbide, polyethylene, leather |
Manifold | Carbon steel, nickel plating, carbide, 302 stainless steel, |
| PTFE, UHMWPE |
Mixer | Stainless steel housing with acetal elements |
Spray gun | Stainless steel, acetal, polyethylene, nylon, |
| polypropylene, carbide, polyurethane, |
Configurable options loaded with features
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Hoppers |
|
| Viscon Fluid Heater* |
|
| Transfer Pumps* | ||||
|
|
| • 240 VAC, 4000 watts |
|
| • Feeds material to main pumps | ||||
• Jacketed for heated water or oil |
|
| • Other voltage options |
|
| • Recommended for highly | ||||
• Made of rugged, |
|
| sold separately |
|
| viscous materials | ||||
|
|
|
|
|
|
|
| |||
|
|
|
|
|
|
| • Easily mounts to | |||
• Available in heated* or standard |
|
|
|
|
|
| (76 l) hoppers or drums | |||
|
|
|
|
|
| • Choose Graco T2 or | ||||
|
|
|
|
|
|
| ||||
|
|
|
|
|
| Monark 5:1 transfer pump | ||||
• Excellent for high ratio applications |
|
|
|
|
|
| ||||
|
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
|
|
|
Twistork Agitators
•Helps maintain proper material consistency
•Easily mounts on
•Approved for use
in explosive atmospheres
5
* Models approved for explosive atmospheres are available