INTRODUCTION
ForewordSpecifications
The specifications, details, and photographs in this manual represent the Model H8224 as supplied when the manual was prepared. However, owing to Grizzly’s policy of continuous improvement, changes may be made at any time with no obligation on the part of Grizzly.
If you have any comments regarding this manual, please write to us at the following address:
Grizzly Industrial, Inc.
C/O Technical Documentation
P.O. Box 2069
Bellingham, WA
Email: manuals@grizzly.com
Most importantly, we stand behind our tools. If you have any service questions or parts requests, please call or write us at the location listed below.
Grizzly Industrial, Inc.
1203 Lycoming Mall Circle
Muncy, PA 17756
Phone: (570)
Fax: (800)
Web Site: http://www.grizzly.com
Cup Size | 120cc | |
Feed Type | Gravity | |
Fluid Tip Size | 0.8mm | |
Air Consumption | ||
Operating Pressure Range | ........ | |
Max. Air Pressure | 120 PSI | |
Cup Material | Plastic | |
Pattern Width | ||
Body Material | Aluminum | |
Air Inlet Size | 1⁄4" NPT | |
Read the manual before operation. Become familiar with this tool, its safety instructions, and its operation before beginning any work. Serious personal injury may result if safety or operational information is not understood or followed.
Model H8224 HVLP Spray Gun |