Grizzly H7673 instruction manual Atomizing Cap Fan Adjustments, Fan adjustment

Page 12

Atomizing Cap and

Fan Adjustments

The atomizing cap needs to be adjusted for horizontal or vertical spraying patterns. Spraying in the wrong direction may lead to material build up on the atomizing cap horn. Many performance problems are caused by clogged atomizing holes on the atomizing cap horns (see Cleaning on Page 13).

Holes

Stroke

Figure 6. Set up for horizontal stroke

direction with vertical fan pattern.

Stroke

 

Pattern Control

 

 

Figure 7. Set up for vertical spray stroke

with horizontal fan pattern.

Rotating the pattern adjustment control in Figure 7 will give you a range between the two patterns in Figure 8.

190 mm

Figure 8. Fan adjustment.

-12-

Model H7673 HVLP Spray Gun

Image 12
Contents Deluxe Mini Hvlp Spray GUN Page Table of Contents Safety Safety Instructions For Pneumatic ToolsBefore Operating This Equipment Wear Approved Hearing Protection Additional Safety Instructions for Hvlp Spray Guns Operating PRESSURE. doIntroduction Foreword Contact InfoTool Data SET UP UnpackingInventoryAssemblyControls ControlsOperations SprayingSpray technique Atomizing Cap Fan Adjustments Fan adjustmentMaintenance CleaningLubrication Troubleshooting Symptom Possible Cause SolutionSymptom Possible Cause Solution Parts Breakdown DescriptionWarranty and Returns Warranty Card Place Stamp Here