SECTION 2: INTRODUCTION
Foreword |
| Contact Info |
|
|
|
|
|
|
We are proud to offer the Grizzly Model H7673 HVLP Spray Gun. This model is part of a growing Grizzly family of fine tools. When used according to the guide- lines set forth in this manual, you can expect years of
The Model H7673 is designed to be used for smaller jobs where large volumes of material are not needed. The Model H7673 features HVLP technology, which has greater transfer efficiency than suction feed spray guns and reduces overspray, saving on material costs.
It is our pleasure to provide this manual with the Model H7673. It was written to encourage safety considerations and guide you through general operating pro- cedures and maintenance.
The specifications, details, and photo- graphs in this manual represent the Model H7673 as supplied when the manual was prepared. However, owing to Grizzly’s pol- icy of continuous improvement, changes may be made at any time with no obliga- tion on the part of Grizzly.
Tool Data
Type | HVLP Gravity Feed | |
Fluid Tip | 0.8 mm | |
Air Consumption | 6 CFM | |
Inlet Air Pressure | ||
Fluid Pressure | >10 PSI | |
Maximum Pattern Width | ................ 190 mm | |
Material Capacity | 100 ml / 4 fl oz | |
Model H7673 HVLP Spray Gun
If you have any comments regarding this manual, please write to us at the following address:
Grizzly Industrial, Inc.
C/O Technical Documentation
P.O. Box 2069
Bellingham, WA
Most importantly, we stand behind our tools. If you have any service questions or parts requests, please call or write us at the location listed below.
Grizzly Industrial, Inc.
1203 Lycoming Mall Circle
Muncy, PA 17756
Phone: (570)
Fax: (800)
Web Site: http://www.grizzly.com
Read the manual before operation. Become familiar with this spray gun, its safety instructions, and its opera- tion before beginning any work. Serious personal injury may result if safety or operational information is not understood or followed.