Grizzly H7667, H7666 instruction manual Maintenance, Cleaning

Page 15

SECTION 6: MAINTENANCE

Cleaning

Proper cleaning is the best way to ensure trouble free performance from your spray gun. If your gun is not thoroughly cleaned, damage and poor spraying will result. Problems caused by improper cleaning will not be covered by the warranty. Clean the spray gun immediately after each use.

To clean your spray gun:

1.Spray a small amount of solvent through the spray gun.

Note: Check with local laws regarding this practice. If you are spraying on a regular basis, spraying solvents into the air may be illegal. A cabinet style spray gun cleaner may be required.

2.Disconnect the gun from the com- pressed air!

3.Unscrew the cup.

4.Disassemble the gun by unscrewing the fluid control knob, removing the spring and needle.

Fluid Tip

Filter

Cup

 

 

 

Fluid

 

Needle

Control

 

Knob

Atomizing

 

 

Cap

Spring

 

 

 

Figure 14. Disassembly for cleaning.

5.Unscrew the atomizing cap with your fingers and the fluid tip with the ser- vice wrench. The fully disassembled gun should look like Figure 14.

6.Rinse these parts thoroughly in sol- vent then dry with compressed air or let air dry.

Note: If the small holes in the atomiz- ing cap become blocked, soak in clean solvent. If the blockage still exists, clear the blockage with a small needle, taking great care to not enlarge or damage the hole. Damage to the hole will create a disrupted spray pattern.

7.Use the cleaning brush with solvent to clean the inner orifice and other hard to reach areas on the outside of the spray gun body.

8.Wipe the rest of the gun body with a shop towel and dry.

EXPLOSION HAZARD! Chlorinated Solvents like 1,1,1-Tricloroethane and Methylene Chloride (methyl chloride) can chemically react with aluminum and may explode. Many parts in spray guns are made of alu- minum. Read solvent label carefully before using solvent.

NOTICE

DO NOT soak the spray gun body in solvent. Prolonged exposure to sol- vent will rapidly deteriorate the spray gun washers and seals. Ignoring this notice will void your warranty.

Model H7666/H7667 LVLP Spray Gun

-15-

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Professional Lvlp Spray GUN Page Table of Contents Safety Safety Instructions For Pneumatic ToolsBefore Operating This Equipment Safety Instructions For Pneumatic Tools Operating PRESSURE. do Additional Safety Instructions for Lvlp Spray GunsForeword Contact Information IntroductionTool Data Sheet UnpackingInventory SET UPControls AssemblyControlsSpraying OperationsSpray technique YesNo Fan adjustment Model H7666/H7667 Lvlp Spray Gun Atomizing Cap Fan AdjustmentsG6261-Campbell Hausfeld Water Filter AccessoriesCleaning MaintenanceLubrication Symptom Possible Cause Solution TroubleshootingSymptom Possible Cause Solution Model H7666/H7667 Lvlp Spray Gun Description Parts Breakdown H7666Parts Breakdown H7667 Warranty and Returns Warranty Card Place Stamp Here

H7667, H7666 specifications

Grizzly's H7666 and H7667 wood lathes are designed to cater to both hobbyists and professional woodworkers looking for reliable, high-performance machinery. These models are known for their robust construction and user-friendly features, making them excellent choices for turning projects ranging from delicate spindles to large bowls.

The H7666 lathe boasts a powerful 1 HP motor, offering ample torque for various woodturning tasks. The variable speed control is a standout feature, allowing users to adjust the speed from 600 to 3600 RPM, catering to both rough turning and finishing. Its generous 16-inch swing over the bed enables the turning of larger projects, while a 42-inch bed length provides ample working space for intricate designs.

The H7667 model takes it a step up with a more powerful 2 HP motor, delivering increased torque for demanding projects. This lathe also features variable speed capabilities, but it ranges from 50 to 3500 RPM, giving woodworkers the flexibility they need for different types of wood and turning techniques. This wider speed range allows for greater versatility, facilitating tasks from initial shaping to detailed finishing touches.

Both models come equipped with a durable steel frame that minimizes vibrations during operation, ensuring smooth and precise cuts. The easy-to-use tool rest adjusts quickly and securely, providing support and stability for the user's tools. The tailstock's rotating center helps facilitate drilling and hollowing, enabling greater versatility in project design.

Moreover, the H7666 and H7667 lathes have a built-in spindle lock feature, which simplifies changing accessories and maintaining the machine. Their dust collection ports are compatible with standard systems, helping to maintain a clean workspace while reducing airborne dust.

Additionally, the easy-to-read digital readout enhances precision, allowing woodworkers to make accurate adjustments while turning. Both models are engineered to provide a consistent and user-friendly experience, whether you are a seasoned professional or a passionate beginner. With their combination of power, precision, and versatility, Grizzly's H7666 and H7667 lathes are well-equipped to handle a wide range of woodturning projects.
Top Page Image Contents