Harbor Freight Tools 66163 operating instructions Maintenance Servicing, See Figure B

		FIGURE A
	POWER-ON LIGHT
		(4)
COLLECTOR		POWER SWITCH
RELEASE
	BUTTON	(5)
(3)		MOTOR
COLLECTOR		(1)
(2)

LARGE	SMALL	LIQUID	12 VOLT
CREVISE	CREVISE	PICK-UP	POWER
NOZZLE	NOZZLE	NOZZLE	PLUG
(6)	(10)	(7)	(11)

5.Vacuum in any direction until the area is cleaned of dirt, debris, or liquid.

6.When finished, release the Power

Switch (5) to turn off the Auto Vacu- um. Then unplug the tool from the vehicle’s cigarette lighter/accessories outlet.

(See Figure A.)

7.Before storing, thoroughly clean the Collector (2), Filter Support (8), Filter (9), and Impeller area of all dirt, de- bris, and liquid. To do so:

a.Press the Collector Release Button

(3) to remove the Collector (2).

b.Remove the Filter (9) from the Filter Support (8).

c.Wash the Collector (2), Filter Sup- port (8), and Filter (9) with clean, soapy water. Rinse the filter thor- oughly. Then allow to dry.

d.Use a soft brush or compressed air to clean out the Impeller area.

e.Reassemble the Auto Vacuum and store it in a clean, dry, safe location out of reach of children and other

unauthorized persons.

(See Figure B.)

COLLECTOR	CONTAINER RELEASE BUTTON
(2)	(3)
	FILTER
	(9)

IMPELLER
	FILTER
FIGURE B	SUPPORT
	(8)

Maintenance And

Servicing

Procedures not specifically explained in this manual must be performed only by a qualified technician.

To prevent serious injury

from accidental operation:

Turn the Power Switch (5) of the Auto Vacuum to its “OFF” position and unplug the tool from the vehicle’s cigarette lighter/accessories outlet before performing any inspection, maintenance, or cleaning procedures.

To prevent serious injury from tool failure:

Do not use damaged equipment. If abnormal noise or vibration occurs, have the problem corrected before further use.

SKU 66163 For technical questions, please call 1-800-444-3353. Page 6