Grizzly H6330 instruction manual Tank Assembly, To assemble the paint tank

Page 8
6. Connect a 1/4" NPT material hose (not included) to the fluid outlet adapter on the tank lid.
7. Install a pressure regulator (not includ- ed), between the tank regulator, (Figure 3) and the spray gun, since some of the pressurized air from the compressor will bypass the tank regulator.
Figure 3 depicts the paint tank con- nected to a compressed air system with a filter/regulator unit and a spray gun.
The filter/regulator unit protects your tool from damaging water build-up, and allows you to adjust and maintain regulated air pressure. If you plan on installing a filter/regulator unit in your compressed air system, follow the con- nection instructions with the unit.

Tank Assembly

 

 

Pressure Gauge

 

 

 

 

 

 

Lift Handle

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Regulator Assembly

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Air Inlet Fitting

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Air Outlet Fitting

 

 

 

 

 

 

 

 

 

Fluid Outlet Adapter

Safety Valve

Figure 2. Regulator and lift handle installed on paint tank.

To assemble the paint tank:

1. Apply pipe thread tape to all male pipe threads.

2. Thread the lift handle into the center hole on the tank lid (see Figure 2) and secure with the hex nut.

3.Thread the regulator assembly onto the

swivel adapter on the lid, as shown in Figure 2.

4.Connect a 1/4" NPT air supply hose

(not included) to the inlet fitting on the regulator.

5. Connect a 1/4" NPT air supply hose (not included) to the air outlet fitting on the opposite side of the regulator.

6idb^oVi^dc 6idb^oVi^dc

6^g=dhZ6^g=dhZ GZ\jaVidg

HegVn

<jc

BViZg^Va=dhZ

IVc`

GZ\jaVidg

Fj^X`

Fj^X`

 

8dccZXidg

8dccZXidg

GZ\jaVidg

 

 

6^g

 

 

8dbegZhhdg

Fj^X`

 

 

8djeaZg

 

 

Fj^X`

6^g 8djeaZg

Hjeean;^aiZg =dhZ

Figure 3. Paint tank connect to air compressor and spray gun.

-6-

Model H6330 21⁄4 Gallon Paint Tank

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Model H6330 21⁄4 Gallon Paint Tank Ss ,EAD from Leadbased PAINTS Before Operating This Equipment SafetySafety Instructions for Pneumatic Tools USE Correct AIR Pressure Additional Safety Instructions for Paint Tanks Cleaning and MaintenanceForewordSpecifications IntroductionSetup UnpackingInventoryTank Assembly To assemble the paint tankOperations Tank RegulatorTank Setup To use your paint tankCleaning and Lubrication Cleaning the TankTank Troubleshooting Symptom Possible Cause SolutionTo Reduce Risk of Serious Injury When Using this Equipment H6330 Paint TankWarranty Warranty Card Place Stamp Here

H6330 specifications

The Grizzly H6330 is a versatile and powerful woodworking tool designed for both hobbyists and professional woodworkers. At its core, the H6330 is a high-performance bandsaw that boasts a range of features designed to enhance precision and efficiency in various woodworking applications.

One of the standout features of the Grizzly H6330 is its impressive 10-inch cutting capacity. This allows woodworkers to handle larger materials with ease, making it suitable for a wide range of projects, from intricate detail work to large-scale cutting tasks. The saw table is constructed from cast iron, which not only provides exceptional stability but also minimizes vibrations during operation, ensuring smooth and accurate cuts.

Equipped with an adjustable blade height and a solid cast iron trunnion system, the H6330 allows users to make precise adjustments quickly and effectively. The built-in rip fence further enhances its usability, enabling straight and accurate cuts while providing adequate support for long workpieces.

Technology-wise, the Grizzly H6330 employs a robust 2 HP motor that delivers sufficient power for cutting through hardwoods and other challenging materials. This motor is designed to operate smoothly and quietly, allowing for extended periods of use without excessive fatigue or discomfort. The bandsaw also features a heavy-duty cast iron frame that enhances its durability and reliability, making it an excellent investment for long-term use.

Safety is a critical consideration in woodworking, and the Grizzly H6330 incorporates several safety features such as a blade guard and a quick-release tension mechanism. These features not only protect the user but also facilitate quicker blade changes and maintenance processes.

Another notable characteristic of the H6330 is its easy-to-use tracking adjustment system. This allows users to maintain optimal blade alignment effortlessly, contributing to high-quality cuts and prolonging blade life. Additionally, the saw’s portability is enhanced by its built-in wheels, making it easier to move around a workshop or job site.

In summary, the Grizzly H6330 is a powerful and efficient bandsaw that combines robust construction with user-friendly features. Its precision cutting capabilities, strong motor, and excellent safety features make it an ideal choice for anyone looking to engage in serious woodworking projects. Whether for small crafts or larger furniture pieces, the Grizzly H6330 stands out as a reliable option in the realm of woodworking tools.
Top Page Image Contents