Harbor Freight Tools 93119 Specifications, Save This Manual, Safety Warnings and Precautions

Page 2

Specifications

Maximum Pressure

80 PSI

Air Inlet

1/4” NPT

 

 

 

 

Working Pressure

30-60 PSI

Net Weight

20.5 lb.

 

 

 

 

Tank Capacity

2.5 gallons

Dimensions

93/4” Diameter x 181/2

Save This Manual

You will need the manual for the safety warnings and precautions, assembly instructions, operating and maintenance procedures, parts list and diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Keep the manual and invoice in a safe and dry place for future reference.

Safety Warnings and Precautions

WARNING: When using tool, basic safety precautions should always be followed to reduce the risk of personal injury and damage to equipment. Failure to observe these warnings and precautions could result in explosive failure of the pot, its components or attachments and in serious injury to self or others.

Read all instructions before using this tool!

1.Keep work area clean. Cluttered areas invite injuries.

2.Observe work area conditions. Do not use machines or power tools in damp or wet locations. Don’t expose to rain. Keep work area well lighted. Do not use electrically powered tools in the presence of flammable gases or liquids.

3.Keep children and animals away. Children must never be allowed in the work area. Do not let them handle machines, tools, or hoses.

4.Store idle equipment. When not in use, tools must be stored in a dry location to inhibit rust. Always lock up tools and keep out of reach of children.

5.Do not force tool. It will do the job better and more safely at the rate for which it was intended. Do not use inappropriate attachments in an attempt to exceed the tool capac- ity.

6.Use the right tool for the job. Do not attempt to force a small tool or attachment to do the work of a larger industrial tool. Do not use a tool for a purpose for which it was not intended.

7.Dress properly. Do not wear loose clothing or jewelry as they can be caught in moving parts. Protective, electrically nonconductive clothes and nonskid footwear are recom- mended when working. Wear restrictive hair covering to contain long hair.

8.Use eye and ear protection. Always wear ANSI-approved impact and chemical splash safety goggles. Coatings can produce eye irritation. When cleaning tools exercise caution when using solvents. They can be forcefully ejected from the tool’s nozzle and

REV 06/06

SKU 93119

For technical questions, please call 1-800-444-3353.

Page

Image 2
Contents For technical questions and replacement parts, please call 93119Read all instructions before using this tool SpecificationsSafety Warnings and Precautions Save This ManualSKU For technical questions, please call Unpacking Filling the Pot OperationPreparing the Pot for Use Maintenance Troubleshooting AccessoriesParts List Assembly Diagram