Harbor Freight Tools 43760 operating instructions SKU For technical questions, please call

Page 5

21.Read all of the information concerning coating products and cleaning solvents. Chlorinated solvents (e.g. 1-1-1 Trichlorethylene and Methylene Chloride, also known as methyl chloride) can chemically react with aluminum and may explode. Many paint sprayers contain aluminum. If you have any doubt about potential chemical reactions, contact the solvent or coating manufacturer.

22.Materials used when painting or cleaning may be harmful or fatal if inhaled or swallowed. Only use in an area with adequate ventilation. Use a respirator or mask when painting or using cleaning solvents.

23.Never release the sprayer lid while the cup is pressurized.

24.Industrial applications must follow OSHA requirements.

25.Never point a spray gun at a person or animal. Serious injury could occur.

26.Spraying hazardous materials may result in serious injury or death. Do not spray pesticides, acids, corrosive materials, fertilizers, and toxic chemicals.

27.WARNING: The brass components of this product contain lead, a chemical known to the State of California to cause birth defects (or other reproductive harm).

(California Health & Safety Code § 25249.5, et seq.)

Note: Performance of the compressor (if powered by line voltage) may vary depending on variations in local line voltage. Extension cord usage may also affect tool perfor- mance.

WARNING: The warnings, cautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator.

SKU 43760

For technical questions, please call 1-800-444-3353;

Page 5

Troubleshooting section at end of manual.

 

 

Image 5
Contents 43760 For technical questions and replacement parts, please callContents Save This Manual Safety Warnings and PrecautionsRead all instructions before using this tool SKU For technical questions, please call SKU For technical questions, please call Air Connection Do not use latex paints with this Spray Gun Comparison Conventional versus Hvlp Spray GunsGeneral tips for Preparation Fan Direction Fan Direction and Pattern AdjustmentPattern Adjustment Too Coarse Correct Too Fine Tighten Loosen Techniques After each use Solvent SelectionPart Description 24 23 Spray Pattern Diagnosis ProblemSputtering Spray Problem Cause Solution