6.DO NOT OVERREACH. Keep proper footing and balance at all times to prevent tripping, falling, back injury, etcetera.
7.MAINTAIN A SAFE WORK ENVIRONMENT. Keep work area well lit. Make sure there is adequate surrounding work space.
8.CHECK FOR DAMAGED PARTS. Before using this product, check for damaged parts and any other conditions that may affect the operation of the Canopy. Replace or repair damaged or worn parts immediately.
9.REPLACEMENT PARTS AND ACCESSORIES. When servicing, use only identi- cal replacement parts.
10.MAINTAIN THIS PRODUCT WITH CARE. Keep the Canopy clean, dry, free of oil, grease, liquids, and other debris.
11.MAINTENANCE: For your safety, service and maintenance should be performed regularly by a qualified technician.
12.USE THE RIGHT PRODUCT FOR THE RIGHT JOB. There are certain applica- tions for which this product was designed. Do not use a small tool, attachment, or equipment to do the work of a larger industrial tool, attachment, or equipment. Do not use this product for a purpose for which it was not intended.
SPECIFIC PRODUCT WARNINGS AND PRECAUTIONS
1.DO NOT ATTEMPT TO ASSEMBLE THE CANOPY WHEN HIGH WIND CONDI- TIONS EXIST AS PERSONAL INJURY AND/OR DAMAGE TO THE CANOPY MAY RESULT.
2.MAKE SURE THE CANOPY IS ASSEMBLED AND FIRMLY SECURED (USING THE
3.Do not allow snow to accumlate on the Canopy; the Canopy could collapse.
4.Caution: Heavy, wet snow or extreme windy conditions could damage the Car Canopy. It is recommended that the Tarp be removed under these conditions, to prevent damage to the Car Canopy.
UNPACKING
When unpacking, check to make sure all parts shown on the Parts List (page 6) are included. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible.
Caution: Be alert to possible wind damage; proplonged exposure to wind can cause fasteners and hardware to loosen as the frame flexes. The Car Canopy’s frame strength will be compromised if fasteners and hardware are not tight. Periodically check and make sure all fasteners and hardware are tight. Tubes, stakes, tie downs and rope should also be periodically checked to make sure the unit is always structurally rigid.
SKU 45211 | PAGE 3 | REV 04/02 REV 02/04 |