Harbor Freight Tools Your Guide to Turnbuckles for Harbor Freight Paint Sprayers Assembly

Page 4

ASSEMBLY INSTRUCTIONS

ALL PARTS BELOW REFER TO THE PARTS SHOWN ON PAGE 6.

Note: To insure safe assembly of this product, two people should assemble the Car Canopy.

1.Connect the assorted Tubes and Swaged Tubes (parts #2, 3, 4, 5, 6, 7), 3-Way End Pieces (part #8), and 4-Way Center Pieces (part #9) together as shown in Figure A.

FIGURE A

2.The eight Turnbuckles (part #11) are used to strengthen the frame assembly. Attach the Turnbuckles to the frame assembly and tighten, using a pair of pliers. NOTE: Do not over tighten the Turnbuckles, as bending to the frame assembly will occur. (See Figure B.)

FIGURE B

SKU 45211

PAGE 4

Image 4
Contents CAR Canopy Specifications General Safety Warnings and PrecautionsSave this Manual Specific Product Warnings and Precautions UnpackingAssembly Instructions ALL Parts below Refer to the Parts Shown onINSPECTION, MAINTENANCE, and Cleaning Figure CParts List Description QTY Please Read the Following Carefully